Search found 9 matches

by onegrecook
Sun May 01, 2016 5:38 am
Forum: Tyres, oils etc.
Topic: Used Oil Analysis
Replies: 3
Views: 1304

Used Oil Analysis

Has anyone had a used oil analysis done with their RT LC? I've been sending mine in and it appears the iron is slightly high. Just wondering what others are seeing. I've been changing the oil at 6,000 mile intervals and the iron is averaging 26 ppm with the universal averages showing 18. Any thought...
by onegrecook
Thu Apr 21, 2016 5:07 am
Forum: General Discussions
Topic: crusing speed
Replies: 18
Views: 3799

Re: crusing speed

Mine spends most of it's time right at 4,000 rpm. usually in 6th gear at about 72 mph. It just seems to be smooth and happy at 4k.

by onegrecook
Mon Apr 18, 2016 2:36 am
Forum: General Discussions
Topic: Exhaust Flap Error
Replies: 4
Views: 1556

Re: Exhaust Flap Error

Thanks all, Yes, I could see the flap and it wouldn't move when I actuated the servo motor with the GS911. today I decided to take the servomotor off and see of there was something blocking it from moving or to find out if the cables were stuck. It was clear. However, when I put it all back togethe...
by onegrecook
Sun Apr 17, 2016 3:32 am
Forum: General Discussions
Topic: Exhaust Flap Error
Replies: 4
Views: 1556

Exhaust Flap Error

I did a diagnostic check with the GS911 today and got an error that says "Exhaust flap servomotor, adjustment error". The bike is a 2015 R1200RT with 17,000 miles on it. It is still under warrantee so I'll have the dealer take a look. Am I ok to continue riding it until I can get it to the...
by onegrecook
Tue Oct 27, 2015 4:08 am
Forum: Aftermarket Parts & Accessories
Topic: PDM60 Setting with Heated Gear
Replies: 1
Views: 1504

PDM60 Setting with Heated Gear

Question regarding what to set the PDM at for heated gear. I have a PDM60 installed on my 15 1200RT, and I have connected my Gerbing wiring harness to circuit 4 which is adjustable to 15 Amps. My question is regarding what to set the PDM60 to for different levels of heated clothing. In other words, ...
by onegrecook
Mon Aug 03, 2015 3:59 am
Forum: General Discussions
Topic: Oil level creeping up???
Replies: 16
Views: 3822

Re: Oil level creeping up???

Thanks,


I decided to drain a little oil out. I'm the type that over thinks everything, and I'll worry about it until it looks right. From what i've read, letting a little out should only help the shifting.



by onegrecook
Sun Aug 02, 2015 6:48 pm
Forum: General Discussions
Topic: Oil level creeping up???
Replies: 16
Views: 3822

Oil level creeping up???

I'm not sure what to think of this. I just turned over 7,100 miles on my 2015 RT and recently changed the oil and filter (OEM) at 6,000. So...I have 1,100 miles on this change. I put in exactly 4 quarts and the level was right at the top mark after running it for a while and letting it sit. Now it s...
by onegrecook
Wed Jul 22, 2015 2:17 am
Forum: General Discussions
Topic: Mettalic Matte Paint
Replies: 14
Views: 3992

Re: Mettalic Matte Paint

I also have the grey. I've noticed scuff marks where my legs contact the sides of the tank. I seem to get some static cling with dust accumulating in that location while riding. My riding pants rub the dust into the finish like sand paper and scuff it up. I may paint mine this fall with the 2016 col...
by onegrecook
Tue Apr 21, 2015 3:18 pm
Forum: General Discussions
Topic: Excess Electrical Capacity (2015 R 1200RT)
Replies: 0
Views: 1262

Excess Electrical Capacity (2015 R 1200RT)

Does anybody know what the excess electrical capacity of the 2015 RT (fully loaded) is? The specs say total output is 540 watts, but I don't know how much the current model uses as it is set up now. I'm trying to determine how much room I have for heated clothing and auxillary lights.


Thanks,