BMW R1200RT/R1250RT Forum

The LED's that I bought have a beam pattern that is an exact match of the halogen bulb. Most of the new LED's match the Halogen filament position and shape to ensure proper beam pattern. 

I used these bulbs from Amazon for a total cost of $110 and they work great - much much brighter. I was able to install without taking the light assembly out. https://www.amazon.com/gp/product/B07XKSWSF6/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 [size=2px]https://www.amazon.com/gp/product...

Yes there is a warning notice but it can be cleared with GS-911 - I don't think it will go away by itself. Some people eliminate the flapper valve movement by disconnecting the cables and keeping the motor connected. I would not recommend this except for just trying out a disconnected flapper valve....

No problem with BMW warranty - The servo motor and flapper valve cable connections are still on the bike. All I have to do is disconnect the servo buddy and reconnect the servo motor.

Frankly I did not want to hassle with BMW warranty administration. The service department said that noisy flapper would not be covered by BMW warranty - The valve had to seize. Based on researching the issue my valve would probable seize within the next year given I average 18K miles per year. I did...

[size=2px]I have 2019 R1250 RT with 16,800 miles. The exhaust valve stared make the loud noise on start up around 16K mile. To solve the issue, I tried lubricating flapper valve which lasted about 1-200 miles. Just installed a installed a Servo Buddy servo eliminator with the following results:[/si...

I just replaced my Michelin Road 5 GT's after 3,900 miles with [size=2px]Pirelli Angel GT's [/size] . Front tire down to the wear bars at the center and side. Back tire down to the wear bars at the center, but some rubber left on the sides. Positives - Tires handled well to end of life - best handli...