BMW R1200RT/R1250RT Forum

You can connect two together

gearing too tall as mentioned! I don't have the same slow speed control on the throttle and in the gears on this as I had with the FJR on the RT I am constantly feathering the clutch at low speeds The lack of a handle on the top box and the fact you have to lift the rider and pillion seat to disconn...

Unfortunately not no!

It's a trip to the dealers to get it coded out

I had the same issue but instead I replaced the lights under protest for the newer nano ones

Hi and welcome to the forum

One of the best tyres I have used on a bike!

Good handling, great in the wet about 10k out of the rear and no issues on overbanding etc

Maybe I should start making them and selling them on

Might be worth putting your budget too

Unfortunately not!

I cut and shaped the metal then tacked it on and tried it till it fit then I fully welded it

MikeS wrote: ↑Thu Mar 14, 2024 10:58 pm Mine does the same if i use the kill switch or stall the bike. Won't start unless i turn the ignition off and on again ( resets the dash presets). BMW tells me the batterys fine but cant identity any fault. Starts faultlessly otherwise.

I would replace it out of peace of mind

I replaced my battery on my 2016 last year more out of precaution really!

The battery was good but a couple of times I had the bike not turn over and the clocks reset so I thought best to be safe than sorry

At least its not as bad as your wife ringing to tell you she has just kerbed the new cars wheel 6 weeks after having it

New wheel and a refurb on the trashed wheel later to get it back to looking like new

To be honest the OEM radio on my '18 is a waste of time, AM & FM only and a 3.5mm jack socket for an MP3 player. I mean who still broadcast on those frequencies or uses an ipod nowadays. Then there's the wind & engine noise not to mention my head inside a helmet with -27db earplugs in. My b...

The actual doing bit wasn't that bad, just took a bit of courage to drill the hole! The remote was sitting unused in the spares drawer, the push button cost £8.00, the hole cutter £5.20, (both from Amazon) and the soldering & wire a beer. Quite cheap and in the end easy to do. I have all the ge...

This is something that I also want to do!

It's just finding the time

https://www.facebook.com/groups/8320302 ... 094067440/

There is no restrictions here to stop you posting links!

It's the restrictions on Facebook due to it been a closed group