BMW R1200RT/R1250RT Forum

LED and HID headlamps bulbs are now illegal to retrofit and will cause a failure on the MOT. The only way to get over the law is to have the correct reflectors but these are only fitted by the manufacturers. A lot easier with the normal 7" round headlamps as you can buy the complete unit cheapl...

As long as my Kidneys and chest are warm i don't mind how cold it is

It's a Keis V501RP Pro. It's not a full jacket but a body warmer. I find as long as my torso is warm I've no need for heated sleeves. I've also just bought a pair of Keis G701 gloves but they draw more at 1.6amp.

Thank you, David i can see it's rated at 10 amps for a 2007 model.

Had a recalculation and my jacket only draws 1.5 amps. So i should be fine. With my maths now working correctly with 5 amps i could run a pair of 40 wat spots with ease.

Cheers for the replies. That may be a bit low for heated clothes.

Does anyone know the max watts or amps that the power socket can cope with before tripping the Canbus?

Cheers David. I subscribe to Tinderboxarts on YT but i missed this one.

Now you have posted pictures i can see there not bulking at all. I spotted ones just like them on flee bay very much like them. They were about £20 from good old China. They seem to be Barkbuster rip off's. Agree with TJRL regarding Full Muffs. That's is one of the reasons i don't like them. Ok on l...

Hi, I want to fit an extra brake lamp under the number plate. It's a 2007 model. The lamp is LED and am thinking of tapping into the rear light wires. Will the cambus be affected each time i brake?. I've never fitted extra lights on a cambus bike before so i thought of asking the knowledgeable peopl...

burridge01 wrote: I got them 2nd hand £35 off Ebay,turned up today and they are semi rigid and to be fair they don't look to bad.Nothing like the muffs of yesteryear. Will get them on the gsx1250 at the weekend and ill let you know how they perform sometime next week

With pics please

It's strange ive never seen this on other bikes ive owned over the years. Are there any other makes of bikes that have the same set up?

Just replaced my rear brake pads with EBC HH pad. I know BMW recommends standard sintered pads on the rear but i like the feedback from the HH pads. One question i have is why is one pad thicker than the other?. I've contacted EBC and they inform me i have the correct pads but the person couldn't ex...

I've been told you have to be a full time resident to register a vehicle to a private person. Must have proof of residency. This is needed for insurance as well. I was told this years ago so worth a check to see if it's changed since

I was the same as you regards the muffs,hated them and felt really restricted(had guards on but they dont protect enough)So i have just bought a set of Barkbusters for my GSX1250 work bike https://www.google.com/aclk?sa=l&ai=DChcSEwio9YHp5bv1AhWN6-0KHTO3CZ0YABANGgJkZw&sig=AOD64_1p-jwdYlKsP8...