BMW R1200RT/R1250RT Forum

my problem wasn't the bolt size but the length of extensions needed to get at em! So I bought the extensions, then I found it was trickier than I thought and I was short on time and impatient as ever. So I took it into the nearest dealer who charged me £160 and they left the OEM covers in place!! I ...

I think that the GPS can be heard by both headsets if both are paired with it, but I`m not 100%. Regarding music and pairing with further phones/MP3 players - I think its possible but I`m far from 100%. Another factor for me to consider is the Autocom connecting lead. I`m so clumsy and forgetful tha...

So, Kevin (nice chappie) tested my autocom and found it was working ok. However, he advised that I`d probably be better off buying a pair of quality Bluetooth headsets which would pair with my Garmin. By the time I`ve bought 2 x Autocom headsets and the Garmin audio lead I`ll have spent around £150....

Thanks fella`s, I`m going over to Robsons this afternoon to have it tested, I`ll let ya know how I get on.

Its a Active-PLUS see attached photo. My Garmin is a Zumo 340LM which has a 3.5mm female jack output. 7 pin definitely. Appreciate your help guys 

Hi Folks. I`m heading off soon to France Italy for some sunshine and touring and I need to get an intercoms in place. I already use a Garmin340 and a pair of cheap Bluetooth headsets, but this only allows either headset to headset comms, or Garmin to single headset. Its a useable system, but not ide...

Thanks again David. I don`t suppose you know the thread length of these bolts?  Or if anyone else knows please advise thanks.

Thanks David.

Ah - Torx. I got that bit  :thumbs:  What size are they though?

Please see the attached photos of a RAM type ball/bolt for mounting my Garmin. This method uses one of the RT handlebar bolt holes, and uses a bolt with a RAM ball on the end for mounting a satnav type device. Could anyone provide a link to where I can buy one. Also, the handlebars are secured by 4 ...

Have you got them fitted yet?

I`m based in Leeds. Could anyone recommend anyone for some scratch repair res-praying of my fairing. Shouldn`t be a big job  :-[

Hi Guys. What is the technique for opening the standard RT box? I`ve not had this bike long and haven`t used it yet. I don`t want to sprain the lock or handle by trying to force it. I guess there must be an easy way in.

Is it possible to lower a standard RT by exchanging the shocks?

My RT already has the BMW covers for the cylinder heads, but I want to give as much protection as possible to the fairing and body work. I haven`t tried lowering the bike over to see if the BMW covers will protect the fairing/handlebar ends etc. Does anyone have unfortunate experience of this?