OEM Wiring connectors

[kerdoman]

Thought it might be a good idea to use OEM connectors when installing farkles to keep the wiring looking tidy.
Anyone have a UK source for these, or are they just (probably expensive) Motorad stock items?

[guest2360]

Be very carefull. Cutting into the Canbus can have some alarming results.

[Levisp]

Safest way to add extras is with a fuseblock which is wired straight to the battery plus a trigger wire so power is supplied with ignition ON.


http://www.nippynormans.com/products/fu ... -exclusive


As far as I'm aware this is the only safe option with CANBUs / LINBus bikes. Have not done this myself so can not give any further advice but do a nerd search and I'm sure you will find a thread on the topic.

[T6pilot]

What are you adding?
I added P3 lights and Photon blasters followed Skene's directions and used supplied connectors. My escort 8500ci I piggybacked off the P3 lights power scource, no issues with canbus, knock on wood

[kerdoman]

The cunning plan is to take a 6way single pole fusebox directly from the battery and then feed Autocom, spot/fog lights, satnav, etc via isolation switches and warning lights.

Instead of using aftermarket connectors, an OEM look would be better.