GS911 code read required for brake failure

Having Problems with your BMW R1200RT/R1250RT? or have some Maintenance and Service questions?
Post Reply
User avatar
ricardo1500
Posts: 4
Joined: Tue Nov 07, 2017 11:36 am

GS911 code read required for brake failure

Post by ricardo1500 »

Hi All
Having browsed this forum for a couple of years since buying my 2007 RT, I could do with some help and advice
I need to get my fault codes read for an intermittent solid brake failure light and wondered if anyone knows of anyone in the Midlands area who provides this for a reasonable fee, I would rather avoid going to BMW for the priviledge, having been to them for some recall work my bike initially left with more issues than it went in with!!
Having researched this I've checked all the easy fix possibilities without success so would like to get any error codes read before delving deeper.
Many thanks
Rich
T6pilot
Posts: 574
Joined: Sat Jun 27, 2015 6:12 am
Been liked: 1 time

Re: GS911 code read required for brake failure

Post by T6pilot »

Does 2007 have servo brakes?

Jim
User avatar
ricardo1500
Posts: 4
Joined: Tue Nov 07, 2017 11:36 am

Re: GS911 code read required for brake failure

Post by ricardo1500 »

Hi Jim
Mine has the later 2007 and on system


Rich
User avatar
bieffe
Posts: 34
Joined: Tue Nov 10, 2015 6:34 pm
Location: Slovenia
Bike Model and Year: bmw 1200 rt 2007
Been liked: 1 time
Slovenia

Re: GS911 code read required for brake failure

Post by bieffe »

Hi
Also have 07 1200 rt, and had same problem, 07 RT is known for this issue. I repaired ABS (I am a little of mechanical), based on this, https://www.youtube.com/watch?v=6m2H-nC0CqE,  and some other videos, it is better than cca 1200 eur for new pump, after repairing my bike,it runs without brake problems for three years.
User avatar
ricardo1500
Posts: 4
Joined: Tue Nov 07, 2017 11:36 am

Re: GS911 code read required for brake failure

Post by ricardo1500 »

Yes I suspect I have the same issue, the repair is doable for me, I just want to get the error codes checked first.
Can I ask what method you used to remove the bearing from the pump and how you secured the motor can back to the pump
T6pilot
Posts: 574
Joined: Sat Jun 27, 2015 6:12 am
Been liked: 1 time

Re: GS911 code read required for brake failure

Post by T6pilot »

There is a company in the US called module masters, they can rebuild your ABS unit for $350, google them. Several car and bike friends have used this company and have been very satisfied
Jim
User avatar
bieffe
Posts: 34
Joined: Tue Nov 10, 2015 6:34 pm
Location: Slovenia
Bike Model and Year: bmw 1200 rt 2007
Been liked: 1 time
Slovenia

Re: GS911 code read required for brake failure

Post by bieffe »

Bearing removal was a hard work. I ruined bearing due to remove it, with angle grinder i made two holes and with extractor removed bearing, and replaced it with new. Motor secured with four M 4 screws with washers bented down une third of diameter, so that bented piece hold tight body of motor can. Attached photo where I drilled hole and made M4 thread, in red circle. Sorry my techical english isnt good.
Attachments
ABS ll.PNG
User avatar
ricardo1500
Posts: 4
Joined: Tue Nov 07, 2017 11:36 am

Re: GS911 code read required for brake failure

Post by ricardo1500 »

Thank you both for your  very useful informaton, I will be performing this repair as soon as I've ridden the miles to empty the tank ^-^ . I will let you know how I go.
User avatar
bieffe
Posts: 34
Joined: Tue Nov 10, 2015 6:34 pm
Location: Slovenia
Bike Model and Year: bmw 1200 rt 2007
Been liked: 1 time
Slovenia

Re: GS911 code read required for brake failure

Post by bieffe »

[size=2px]Found picture how I secured motor can to pump [/size]
Attachments
Modified ABSll.JPG
Post Reply