2014 r1200rt lc hill start assist

General discussion of the BMW R1200RT/R1250RT
Post Reply
peteandalex
Posts: 8
Joined: Sat Jul 14, 2018 11:19 am

2014 r1200rt lc hill start assist

Post by peteandalex »

hi all just took delivery of this 14 plate r120rt lc
lovely bike but how do you find this hill start
when I use it I have to rev a bit more and when I release clutch is sort of dies and lurches best way to use it or not use
I find not using it easier but would like to use it if it wasn't so snatchy


any feed back would be welcome




Pete
BoB21
Posts: 754
Joined: Fri Apr 21, 2017 11:38 am
Has liked: 32 times
Been liked: 34 times
Great Britain

Re: 2014 r1200rt lc hill start assist

Post by BoB21 »

Personally I find it really useful but I release b4 setting off but it does get easier the more you use it.
Steve F
Posts: 673
Joined: Thu Aug 27, 2015 2:56 pm
Bike Model and Year: R1250RT 2022
Great Britain

Re: 2014 r1200rt lc hill start assist

Post by Steve F »

I also find it a great asset when stopped on inclines, as you put both feet on the ground instead of keeping the rear brake pedal pushed down. Yes, it can feel a little awkward when you first start using this feature with getting the revs just right as you let out the clutch, but as they say, practice makes perfect (or at least a smoother transition!). Persevere with it, because it will become easier to match the revs with the clutch bite point and avoid lurches / snatching etc.
TJRL
Posts: 115
Joined: Wed Nov 11, 2015 1:00 pm
Has liked: 4 times
Been liked: 2 times
United States of America

Re: 2014 r1200rt lc hill start assist

Post by TJRL »

BoB21 wrote: Personally I find it really useful but I release b4 setting off but it does get easier the more you use it.
What he said, releasing is far easier than "revving" over it!
2020 R1250RT, 2021 Triton ST-125, 1960 SII Land Rover.
Mark_J
Posts: 7
Joined: Mon Mar 19, 2018 5:16 pm

Re: 2014 r1200rt lc hill start assist

Post by Mark_J »

If you pull the front break again it will switch the hill start assist off, just cover with back brake when doing so.


It takes a few goes to get the hang of it!
User avatar
stayingupright
Posts: 381
Joined: Wed Mar 11, 2015 8:21 pm

Re: 2014 r1200rt lc hill start assist

Post by stayingupright »

Only practice will make it easier
I was born with nothing and unfortunately I still have most of it left.
User avatar
Sprintgull
Posts: 493
Joined: Tue Jul 05, 2016 12:41 pm

Re: 2014 r1200rt lc hill start assist

Post by Sprintgull »


Took me a while to get the hang of it too.  It ssems that the clutch needs to drive against the brake resistance for a short time (a second or so) before it releases and extra revs don't seem to make this time any different.  Depending on the gradient I sometimes just grab the brake and release to switch it off - that works too.  Practice makes perfect.


Love it, although I admit before I got the bike it did seem like a solution looking for a problem.
ds99
Posts: 404
Joined: Mon Jul 18, 2016 3:06 pm

Re: 2014 r1200rt lc hill start assist

Post by ds99 »

guest2383

Re: 2014 r1200rt lc hill start assist

Post by guest2383 »

Like most people on here, I found it difficult and clunky to start with, but with practice it's fine.

I really like it for inclines at junctions - especially where visibility is restricted when pulling out - solo or two up!
Post Reply