Alarm

General discussion of the BMW R1200RT/R1250RT
Post Reply
User avatar
Browney
Posts: 18
Joined: Thu Aug 16, 2018 7:28 pm

Alarm

Post by Browney »

Hi all,

My 2010 RT looks like it's going to be written off so I removed the DWA 6 alarm, one plug basically. I now have a 2013 model coming and was wondering if it's just as easy to fit? ie plug it in and away you go.
I'm hoping I don't have to take it to BMW to be set up.
Any help would be appreciated.

Cheers

I did originally post this in the electrical system part of the forum but got no replies, so fingers crossed now  :)
User avatar
Browney
Posts: 18
Joined: Thu Aug 16, 2018 7:28 pm

Re: Alarm

Post by Browney »

So, I fitted the alarm and it works fine but, now my tyre pressure monitor doesn't work. My old bike had the monitor too and it worked fine.

The alarm incorporates the monitor unit I believe.

I have disconnected the battery for 5 mins but it hasn't made a difference. I have done a 20+ mile trip and nothing. After about 15 mins the amber warning light comes on to say I have flat tyres.

Does anyone know of a fix for this?

cheers
kioolt
Posts: 73
Joined: Thu Jun 30, 2016 3:01 am
United States of America

Re: Alarm

Post by kioolt »

I would try disconnecting the alarm to make sure it's not just a coincidence that it happened after you installed the alarm.
The cheapest thing on a BMW is the nut that connects the handlebars to the seat.
User avatar
David.
Subscriber
Posts: 8007
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 332 times
Great Britain

Re: Alarm

Post by David. »

Browney wrote:The alarm incorporates the monitor unit I believe.
Which unit is it, this thread from BMWMOA suggests there may be three options, https://forums.bmwmoa.org/showthread.ph ... heft-Alarm

"The only question is which box... RDC (TPM) Only, Alarm only, or Alarm and RDC (TPM) combined."
User avatar
Browney
Posts: 18
Joined: Thu Aug 16, 2018 7:28 pm

Re: Alarm

Post by Browney »

Thanks for that. But like I said my previous bike had the TPM too and it worked fine.  :-X

I'll have another tinker and see if I can get it to work.

Cheers for that though.
User avatar
Browney
Posts: 18
Joined: Thu Aug 16, 2018 7:28 pm

Re: Alarm

Post by Browney »

So, I stuck the standalone TPM back on and it works again... I'm confused  :-\

Here's a couple of pics I took of the units. Can anyone see anything that stands out as wrong??

Attachments
20180827_092150.jpg
User avatar
David.
Subscriber
Posts: 8007
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 332 times
Great Britain

Re: Alarm

Post by David. »

I'm confused.com, the TPM unit (RHS) has one electrical connector, whereas the combined TPM/Alarm unit (LHS) appears to have two.

Image

TPM Unit, https://www.boonstraparts.com/en/part/b ... B100021U0L

TPM/Alarm Unit, https://www.kfm-motorraeder.de/cms/en/g ... 5758544716
Last edited by David. on Mon Aug 27, 2018 8:05 pm, edited 1 time in total.
User avatar
David.
Subscriber
Posts: 8007
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 332 times
Great Britain

Re: Alarm

Post by David. »

Browney wrote:I'm hoping I don't have to take it to BMW to be set up.
Looks like the TPMS wheel sensors need pairing to the TPM/Alarm unit.

See this BMWMOA thread, inc. the link to hexcode, https://forums.bmwmoa.org/showthread.ph ... 13-R1200RT
Last edited by David. on Tue Aug 28, 2018 7:15 am, edited 1 time in total.
User avatar
Browney
Posts: 18
Joined: Thu Aug 16, 2018 7:28 pm

Re: Alarm

Post by Browney »

They certainly did and Cannon BMW in Braintree did it for me for free  8)

Im a happy man.

Oh and the other connector on the alarm is just blank.
Post Reply