Protecting plastic bits - temporarily

General discussion of the BMW R1200RT/R1250RT
User avatar
timminator
Posts: 441
Joined: Tue Mar 08, 2016 3:48 am
Been liked: 2 times

Protecting plastic bits - temporarily

Post by timminator »

This weekend I am taking a precision maneuvering course on my 2016 RT, this is very low speed u-turns, and other skills, similar to what police training offers.  I have heard that there's a higher risk of dropping the bike in this course, which makes sense.  I already have the BMW cylinder guards installed but would like to put something on the panniers to cushion them if possible.


I don't need something permanent, just stick it on for the training and then take it back off.  Any of you had luck with something like this?
BMW MOA #210438
User avatar
milleplod
Posts: 272
Joined: Tue Jul 03, 2018 2:41 pm
Been liked: 1 time

Re: Protecting plastic bits - temporarily

Post by milleplod »

I'd take the panniers off!!  :alas:

Pete
Last edited by milleplod on Tue May 28, 2019 7:33 pm, edited 1 time in total.
User avatar
David.
Subscriber
Posts: 8007
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 332 times
Great Britain

Re: Protecting plastic bits - temporarily

Post by David. »

The trainer was an ex. sgt. of the local police force motorcycle section.

https://www.youtube.com/watch?v=1v3-5Gs5KOw
Last edited by David. on Tue May 28, 2019 9:18 pm, edited 1 time in total.
simbo
Posts: 1372
Joined: Fri Sep 16, 2016 10:33 pm
Location: Greater Manchester
Bike Model and Year: RT 2011
Has liked: 68 times
Been liked: 96 times
Great Britain

Re: Protecting plastic bits - temporarily

Post by simbo »

milleplod wrote: I'd take the panniers off!!  :alas:

Pete

I'd do it on someone else's bike!!  :alas:
The GS 'is' the better bike :-)
User avatar
timminator
Posts: 441
Joined: Tue Mar 08, 2016 3:48 am
Been liked: 2 times

Re: Protecting plastic bits - temporarily

Post by timminator »

milleplod wrote: I'd take the panniers off!!  :alas:

Pete
Haha, good tip, but that won't prevent damage to the bike.  The panniers will absorb the fall and protect some more expensive components underneath them.  I'm thinking I'll just duct tape a foam pad, like the interlocking floor tiles, to the sides of them.
BMW MOA #210438
bandytales
Posts: 554
Joined: Fri Nov 03, 2017 10:54 am

Re: Protecting plastic bits - temporarily

Post by bandytales »

simbo wrote:
I'd do it on someone else's bike!!  :alas:

Me too.I really don't see the point of this 'training', if there is a chance of dropping your own pride and joy. In the real world very few people will NEED to conduct these types of maneuvers. Just get off the bike an push it.
Don't get me wrong. I love training, It is most worthwhile, but not high risk stuff on your own machine. Training bikes have been prepped for just these sorts of incidents and to do it on your own bike smacks of being foolhardy.  When I do it I go to a training authority with bikes ready for customers to do their 'thing'. I recommend you do the same.
User avatar
David.
Subscriber
Posts: 8007
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 332 times
Great Britain

Re: Protecting plastic bits - temporarily

Post by David. »

On i2i MC1, your own bike is used for Slow Speed Machine Control.

"In this section you will understand the stories you have created about slow speed control and learn advanced techniques for controlling your machine at slow speeds."

https://www.facebook.com/i2imotorcyclea ... 332078365/
Last edited by David. on Wed May 29, 2019 9:39 am, edited 1 time in total.
MEM62
Posts: 159
Joined: Thu Mar 12, 2015 3:40 pm

Re: Protecting plastic bits - temporarily

Post by MEM62 »

timminator wrote:The panniers will absorb the fall and protect some more expensive components underneath them.
What is there underneath that is more expensive than the panniers?  Not much I think. 
User avatar
Sprintgull
Posts: 493
Joined: Tue Jul 05, 2016 12:41 pm

Re: Protecting plastic bits - temporarily

Post by Sprintgull »

Over here car accessory stores sell stick on protectors for car bumpers (fenders?) for about £10.  Put them along the edge which will ground first.  They are black and look like they were always there.
User avatar
timminator
Posts: 441
Joined: Tue Mar 08, 2016 3:48 am
Been liked: 2 times

Re: Protecting plastic bits - temporarily

Post by timminator »

MEM62 wrote: What is there underneath that is more expensive than the panniers?  Not much I think.
Any number of things, including your exhaust and swing-arm.
BMW MOA #210438
User avatar
timminator
Posts: 441
Joined: Tue Mar 08, 2016 3:48 am
Been liked: 2 times

Re: Protecting plastic bits - temporarily

Post by timminator »

Sprintgull wrote: Over here car accessory stores sell stick on protectors for car bumpers (fenders?) for about £10.  Put them along the edge which will ground first.  They are black and look like they were always there.
I will check into that, thanks.
BMW MOA #210438
simbo
Posts: 1372
Joined: Fri Sep 16, 2016 10:33 pm
Location: Greater Manchester
Bike Model and Year: RT 2011
Has liked: 68 times
Been liked: 96 times
Great Britain

Re: Protecting plastic bits - temporarily

Post by simbo »

David. wrote: The trainer was an ex. sgt. of the local police force motorcycle section.

https://www.youtube.com/watch?v=1v3-5Gs5KOw

Is that you on that RT? lol
The GS 'is' the better bike :-)
Steve F
Posts: 673
Joined: Thu Aug 27, 2015 2:56 pm
Bike Model and Year: R1250RT 2022
Great Britain

Re: Protecting plastic bits - temporarily

Post by Steve F »

timminator wrote: I will check into that, thanks.
This is what I believe is being referred to, available from Halfords here in the U.K. I also bought a pair for my RT panniers last year, and positioned them along the bottom of the side facing part of the pannier. Hopefully, should the bike fall over, they will prevent the pannier getting gravel rash!

https://www.halfords.com/motoring/car-accessories/exterior-protection/halfords-bodywork-protectors-black
LondonBiker
Posts: 15
Joined: Sun May 05, 2019 9:06 am

Re: Protecting plastic bits - temporarily

Post by LondonBiker »

I’ve got the Wunderlich pannier protector bars and some BMW head guards.  The work very well. Don’t ask me how I know.
User avatar
timminator
Posts: 441
Joined: Tue Mar 08, 2016 3:48 am
Been liked: 2 times

Re: Protecting plastic bits - temporarily

Post by timminator »

LondonBiker wrote: I’ve got the Wunderlich pannier protector bars and some BMW head guards.  The work very well. Don’t ask me how I know.
Haha, and those cylinder protectors work well too, don't ask me how I know either!  My class is at noon today, I'll give you all an update about how it went when it's over.
BMW MOA #210438
Post Reply