2018 r1200rt oil drain plug torx head size

Having Problems with your BMW R1200RT/R1250RT? or have some Maintenance and Service questions?
Post Reply
hzlsh2
Posts: 1
Joined: Thu Jul 04, 2019 2:24 pm

2018 r1200rt oil drain plug torx head size

Post by hzlsh2 »

I'm going to change my oil today but can't quite figure out what torx head size I need to buy for the drain plug.  Is it a 50 or a 55?  Can somebody provide the answer?  Thanks.  Jim M.
User avatar
David.
Subscriber
Posts: 8007
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 332 times
Great Britain

Re: 2018 r1200rt oil drain plug torx head size

Post by David. »

From what I have read & seen elsewhere, it's a 10mm hex, not a torx, https://www.bmwsporttouring.com/topic/7 ... 4-r1200rt/
Last edited by David. on Mon Mar 23, 2020 3:12 pm, edited 1 time in total.
User avatar
Boxflyer
Posts: 93
Joined: Wed Nov 26, 2014 12:00 am
Been liked: 16 times

Re: 2018 r1200rt oil drain plug torx head size

Post by Boxflyer »

Deleted
Last edited by Boxflyer on Mon Aug 29, 2022 3:05 am, edited 2 times in total.
Frazer
Posts: 2
Joined: Tue Aug 06, 2019 10:13 pm

Re: 2018 r1200rt oil drain plug torx head size

Post by Frazer »

Hi. My 2019 1250 is a t55 torx. When reinstalling torque it to 42 Nm with a new crush washer.
Frazer
Posts: 2
Joined: Tue Aug 06, 2019 10:13 pm

Re: 2018 r1200rt oil drain plug torx head size

Post by Frazer »

After doing a bit more reading on Boxflyers tool list I tried a 10mm allen and it fit perfectly. Looking at the hex, there is a small relief at each corner which must allow the torx to work also. I just changed my oil last week and used the T55 with no problem.
User avatar
David.
Subscriber
Posts: 8007
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 332 times
Great Britain

Re: 2018 r1200rt oil drain plug torx head size

Post by David. »

A Camhead uses an 8mm hex, whilst a T50 torx will probably work, it's not as good a fit. The hex sides of the drain plug are definitely flat to accept the 8mm hex tool.
Post Reply