Taller screen

Looking for Aftermarket parts and Accessories for your BMW R1200RT/R1250RT or found something useful you want to share? Or just a general question?
Post Reply
Glenn
Posts: 251
Joined: Sat Jan 15, 2022 7:49 pm
Location: Shropshire
Bike Model and Year: R1250RT LE 2018
Has liked: 18 times
Been liked: 83 times
Great Britain

Taller screen

Post by Glenn »

I have a bike with what I think is a standard screen on my 2011 model, for my height 6'2" I have short legs and a long back so sit quite high. I have found http://www.bmw-windshields.co.uk/contents/en-uk/p140_bmw-r1200rt-windshield-tall-vstream-for-r1200rt.html but not sure if it for a 2010 - 13 bike, are there other options available?


Last edited by Glenn on Sun Mar 06, 2022 4:59 pm, edited 1 time in total.
User avatar
David.
Subscriber
Posts: 8007
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 332 times
Great Britain

Re: Taller screen

Post by David. »

I have a Ztechnik VStream windshield fitted to my 2012 bike.
Last edited by David. on Sun Mar 06, 2022 5:47 pm, edited 1 time in total.
User avatar
emlevy
Posts: 74
Joined: Sun Jul 19, 2020 1:38 am
Location: Evergreen, CO
Bike Model and Year: 2015 R1200RT
Been liked: 2 times
United States of America

Re: Taller screen

Post by emlevy »

I’m 6’6” and have been very pleased with the 24” 7Jurock screen on my ‘15 RT. They make a screen to fit your ‘11 RT — about $185.
2015 R1200RT | 2012 R1200R Classic
Our Gee
Posts: 765
Joined: Sun Nov 08, 2015 7:43 am
Location: North Yorkshire UK
Bike Model and Year: R1200RT 2011
Been liked: 24 times
Great Britain

Re: Taller screen

Post by Our Gee »

Like David I have the larger version (Z2403) of the brilliant Ztechnik screen on my 2011 RT. I have used this screen on three RT's (2008 Hexhead, 2011 and 2013 Twincams) and can highly recommend it. The quality is excellent and the increase in riding pleasure is vast. You may wish to consider fitting up-rated Upper Screen Support Arms as any increase in screen dimensions will put a greater load on the arms.
User avatar
David.
Subscriber
Posts: 8007
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 332 times
Great Britain

Re: Taller screen

Post by David. »

As confirmed above, the windshield support (#2) is the same for both Hexheads & Camheads.

Image

Like Our Gee, I have the up-rated upper screen support arms (replacement for #5) fitted.

This thread gives some good details, BMW R1200RT / R1250RT forum - The BMW R1200RT/R1250RT forum
Last edited by David. on Mon Mar 07, 2022 7:49 am, edited 1 time in total.
Glenn
Posts: 251
Joined: Sat Jan 15, 2022 7:49 pm
Location: Shropshire
Bike Model and Year: R1250RT LE 2018
Has liked: 18 times
Been liked: 83 times
Great Britain

Re: Taller screen

Post by Glenn »

User avatar
JT
Posts: 1
Joined: Mon Mar 07, 2022 10:15 pm
Location: SW Houston
Bike Model and Year: 2011 R1200RT
United States of America

Re: Taller screen

Post by JT »



Be sure to check out California Scientific. https://motorcycleinfo.calsci.com/R1200RTprod.html
This guy offers two styles in three sizes each for the RT.
Mine is the 'Standard Width' 'Large' (pictured on the red bike on his page. Black bike has the wide version)
I'm 6'2" and it works well for me so far.


use the yr button at the top of the page, and note that his measurements on the size chart are taken on the convex side of the shield.


The rest of his site is interesting, actually it's a large blog by an engineer that's been around and has a lot of advice to share.
Last edited by JT on Mon Mar 07, 2022 11:39 pm, edited 1 time in total.
Post Reply