E-Torx vs Metric Tools

Tools for do-it yourselves BMW specialist tools etc.
Post Reply
User avatar
David.
Subscriber
Posts: 8006
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 332 times
Great Britain

E-Torx vs Metric Tools

Post by David. »

Are E-Torx spanners or sockets absolutely necessary or will a Metric (mm) size be close enough.

I might be looking for an E8 spanner, the point to point is 7.5mm. Would I get away with an 8mm metric spanner/socket on this small head size.

The bolt is an M6 x 25mm.
Image

Once removed, could be replaced with a flange hex screw with a 10mm hex head.
Image

Might just "push the boat out" and get a set of these. (Silverline 241501).
Image
Last edited by David. on Sun Dec 04, 2022 4:32 pm, edited 3 times in total.
Dreadnought
Posts: 76
Joined: Tue Mar 29, 2022 11:57 am
Bike Model and Year: R1200RT 2018
Has liked: 14 times
Been liked: 4 times
Great Britain

Re: E-Torx vs Metric Tools

Post by Dreadnought »

I'm always of the opinion that you always use the correct tool, this probably stems from getting my knuckles wrapped with a 12" / 300mm steel rule for using the incorrect ones during my trade apprenticeship
User avatar
David.
Subscriber
Posts: 8006
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 332 times
Great Britain

Re: E-Torx vs Metric Tools

Post by David. »

Following your good sound advice, have ordered a set of the Silverline Trx Spanners from OnBuy.com.

https://www.onbuy.com/gb/silverline-trx ... earch_2000
User avatar
Doctor T
Posts: 1623
Joined: Tue Dec 21, 2021 10:21 pm
Location: west sussex
Bike Model and Year: 2007 R1200RT SE
Has liked: 877 times
Been liked: 230 times
Great Britain

Re: E-Torx vs Metric Tools

Post by Doctor T »

Thats a good price
Trust me I am a retired Doctor and lecturer at Oxford University of Structural and Mechanical/Electrical engineering.
User avatar
David.
Subscriber
Posts: 8006
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 332 times
Great Britain

Re: E-Torx vs Metric Tools

Post by David. »

Doctor T wrote: Sun Dec 04, 2022 6:48 pmThat's a good price.
Good quality too.
Post Reply