driveshaft failure?

Having Problems with your BMW R1200RT/R1250RT? or have some Maintenance and Service questions?
chappers2a
Posts: 59
Joined: Fri Jan 15, 2016 12:17 pm
Bike Model and Year: 2016 RT LE
Been liked: 2 times
Great Britain

driveshaft failure?

Post by chappers2a »

Last Saturday I was unfortunate enough to suffer a breakdown, or to be more precise my bike did! (2016 RT.) I have the extended warranty and after a couple of phone calls and texts my bike was swiftly recovered and I was put in a taxi to take me home. Excellent service from BMW warranty and breakdown. I was unsure of the exact cause of the breakdown but it sounded like gearbox/driveshaft going off the noises and vibration just before I quickly stopped and switched off. I today received a call from my local friendly dealer(Williams of Manchester) and was informed that the splines on the driveshaft where it enters the bevel box had worn off. Hopefully the warranty will cover this as I was informed that this is not an uncommon problem and spares are kept in stock just for this purpose. Fingers crossed.
chappers2a
Sullivj
Posts: 709
Joined: Wed Jul 06, 2016 9:46 pm
Location: Gatwick
Has liked: 18 times
Been liked: 15 times
Great Britain

Re: driveshaft failure?

Post by Sullivj »

Glad you managed to stop before it failed catastrophically!

How many miles has your 2016 bike done?
chappers2a
Posts: 59
Joined: Fri Jan 15, 2016 12:17 pm
Bike Model and Year: 2016 RT LE
Been liked: 2 times
Great Britain

Re: driveshaft failure?

Post by chappers2a »

Bike had just over 35600 miles on clock. Dealer serviced from new. The splines had worn off the driveshaft and also damaged the final drive so that was replaced too. Thank goodness for the BMW warranty!
chappers2a
User avatar
Doctor T
Posts: 1623
Joined: Tue Dec 21, 2021 10:21 pm
Location: west sussex
Bike Model and Year: 2007 R1200RT SE
Has liked: 877 times
Been liked: 230 times
Great Britain

Re: driveshaft failure?

Post by Doctor T »

The PO of my bike had the same happen to him and as you say Warranty covered the repair. I had the UJ snap on my K75. Luckily i had an extended warranty. Oxford BMW collected the bike in Staines Middx, Paid for a cab to take me home, and delivered the bike back to me the next day. Happened on Friday late afternoon and back before 3 pm on Saturday.
Trust me I am a retired Doctor and lecturer at Oxford University of Structural and Mechanical/Electrical engineering.
User avatar
Randyjaco
Posts: 182
Joined: Thu Nov 11, 2021 3:18 am
Location: Friendswood, Texas, USA
Bike Model and Year: R1200RT 2017
Has liked: 36 times
Been liked: 37 times
United States of America

Re: driveshaft failure?

Post by Randyjaco »

We just had a similar incident here in Texas on an RT. The fellow was riding and all of a sudden the rear wheel locked up. It broke up just about everything in the swing arm. When that swing arm breaks, only one smallish bolt holds the rear wheel on. The drive shaft was destroyed. It is a pretty sobering event. No one was hurt, but it was definitely a Code Brown moment :-D
Marvin2Shoes
Posts: 117
Joined: Sun Sep 04, 2022 2:50 am
Location: Queensland, Australia
Bike Model and Year: R1200RT 2011 MOD
Has liked: 76 times
Been liked: 17 times
Australia

Re: driveshaft failure?

Post by Marvin2Shoes »

A friend who owns a R1200C took his bike to our local dealer for work. Sometime later his final drive self destructed and the 3rd party repairer we have in town (whom even rides a BMW) found a clip had been left off the shaft during the previous work at the dealer.
2011 R1200RT Highly Modified
detroitboy
Posts: 2
Joined: Fri Apr 21, 2023 3:13 am
Bike Model and Year: 1200rt 2016
Been liked: 1 time
Ireland

Re: driveshaft failure?

Post by detroitboy »

I posted recently about my driveshaft failure…..my post is MIA??
User avatar
sakm
Administrator
Posts: 1297
Joined: Wed Jun 02, 2021 9:13 pm
Location: Hull, UK
Bike Model and Year: 2016 R1200RT
Has liked: 433 times
Been liked: 388 times
Great Britain

Re: driveshaft failure?

Post by sakm »

detroitboy wrote: Wed Apr 26, 2023 3:06 am I posted recently about my driveshaft failure…..my post is MIA??
its on this thread :thumb:

viewtopic.php?p=68052#p68052
Wierpig
Posts: 35
Joined: Tue Sep 02, 2014 9:31 pm
Location: Somewhere else
Has liked: 4 times
Been liked: 4 times
Great Britain

Re: driveshaft failure?

Post by Wierpig »

Yet still BMW refuse to check the RT shafts as a service measure and only cover other models with the same parts.Looking at the NT1100 for my next bike.BMW customer care is a misnomer, they're not interested.
Panman40
Posts: 325
Joined: Tue Mar 22, 2022 8:46 pm
Has liked: 257 times
Been liked: 33 times
Great Britain

Re: driveshaft failure?

Post by Panman40 »

Some maintenance this morning :shock: , decided to grease the front splines this time and replace the rubber boot. Sprayed up the shaft whilst at it :lol:
Attachments
0D59AC00-9FA6-4DC2-9A57-8CD8C0747211.jpeg
0D59AC00-9FA6-4DC2-9A57-8CD8C0747211.jpeg (518.96 KiB) Viewed 973 times
9A9ACA2D-9AAF-44D9-878E-9077DF3625B1.jpeg
9A9ACA2D-9AAF-44D9-878E-9077DF3625B1.jpeg (626.65 KiB) Viewed 973 times
81973B93-447C-45C4-A3B0-9ACCACB27BB8.jpeg
81973B93-447C-45C4-A3B0-9ACCACB27BB8.jpeg (436.95 KiB) Viewed 973 times
2CE5B320-C5F6-4EEA-8155-510BB9EE08CE.jpeg
2CE5B320-C5F6-4EEA-8155-510BB9EE08CE.jpeg (299.75 KiB) Viewed 973 times
User avatar
Doctor T
Posts: 1623
Joined: Tue Dec 21, 2021 10:21 pm
Location: west sussex
Bike Model and Year: 2007 R1200RT SE
Has liked: 877 times
Been liked: 230 times
Great Britain

Re: driveshaft failure?

Post by Doctor T »

What has changed between older and new bike shafts? Why is it always newer bikes to suffer this failure?. I know my 07 RT had a new driveshaft 2 years ago but apart from this, I haven't heard of other older bikes having this problem. My old R80RT(ex-Kent Police) & R100RT both had over 120 thou miles on them and to be honest i can't remember ever servicing the rear end.
Trust me I am a retired Doctor and lecturer at Oxford University of Structural and Mechanical/Electrical engineering.
Panman40
Posts: 325
Joined: Tue Mar 22, 2022 8:46 pm
Has liked: 257 times
Been liked: 33 times
Great Britain

Re: driveshaft failure?

Post by Panman40 »

Just looks to me like bmw don’t grease the spline shafts from the factory then moisture can get in through the rubber boot and start the rust.
User avatar
Doctor T
Posts: 1623
Joined: Tue Dec 21, 2021 10:21 pm
Location: west sussex
Bike Model and Year: 2007 R1200RT SE
Has liked: 877 times
Been liked: 230 times
Great Britain

Re: driveshaft failure?

Post by Doctor T »

Could it not be the quality of the materials used to cut the costs?
Trust me I am a retired Doctor and lecturer at Oxford University of Structural and Mechanical/Electrical engineering.
Panman40
Posts: 325
Joined: Tue Mar 22, 2022 8:46 pm
Has liked: 257 times
Been liked: 33 times
Great Britain

Re: driveshaft failure?

Post by Panman40 »

The materials look fine, just an oversight on lube from the factory imo.
User avatar
sakm
Administrator
Posts: 1297
Joined: Wed Jun 02, 2021 9:13 pm
Location: Hull, UK
Bike Model and Year: 2016 R1200RT
Has liked: 433 times
Been liked: 388 times
Great Britain

Re: driveshaft failure?

Post by sakm »

Stripped the rear on mine today!

The shaft still looked good and the UJ felt fine too

Small amount of water in the swingarm though :?

I think the rubber boot has had its day so I will replace that in good time
Post Reply