Ceramic Coated my '23 RT

General discussion of the BMW R1200RT/R1250RT
Post Reply
Motor32
Posts: 91
Joined: Mon Sep 21, 2020 9:26 pm
Bike Model and Year: R1250RT '23
Has liked: 2 times
Been liked: 10 times
United States of America

Ceramic Coated my '23 RT

Post by Motor32 »

After detailing my RT, I ceramic coated it with Avalon King Armor Shield IX. Very easy to do, (wipe on, let sit for a minute or so, and wipe off) it's that easy. The finish looks like a wet clear-coat and is supposed to last two years. I did everything, the paint, black plastic, windshield on both sides, rims, cables, frame, exhaust, and my helmets, it looks great.

Steve

https://avalonking.com/products/armor-shield-ix-diy-kit


[url]
CrashD3
Posts: 2
Joined: Sat May 13, 2023 12:26 pm
Bike Model and Year: 1250 RT 2023
United States of America

Re: Ceramic Coated my '23 RT

Post by CrashD3 »

Looking to do the same to my 2023 blue RT with same product. Motor32, any surfaces you would have avoided? Other tips?
Motor32
Posts: 91
Joined: Mon Sep 21, 2020 9:26 pm
Bike Model and Year: R1250RT '23
Has liked: 2 times
Been liked: 10 times
United States of America

Re: Ceramic Coated my '23 RT

Post by Motor32 »

Everything but the tires, seat, and brake disks. Use a paint foam brush to get into the tight spaces. The little glass bottle is very slippery and is easy to knock over or drop, use caution with it. Do the screen inside and out first while the cloth is fresh then you have access to behind the screen area.

Good luck,

Steve
CrashD3
Posts: 2
Joined: Sat May 13, 2023 12:26 pm
Bike Model and Year: 1250 RT 2023
United States of America

Re: Ceramic Coated my '23 RT

Post by CrashD3 »

Done it! Looks great. Will do the top case when it comes in. Take your time and get it good and clean and clay bar first.
Attachments
20230515_102714.jpg
20230515_102714.jpg (438.89 KiB) Viewed 610 times
burridge01
Posts: 559
Joined: Tue Jul 02, 2019 11:25 am
Location: Basildon, Essex
Bike Model and Year: Modified "16" R1200RT
Been liked: 192 times
Great Britain

Re: Ceramic Coated my '23 RT

Post by burridge01 »

Blimey that looks good,the reflection in the wheels rims is superb. Have you a before photo for comparison.
burridge01
Posts: 559
Joined: Tue Jul 02, 2019 11:25 am
Location: Basildon, Essex
Bike Model and Year: Modified "16" R1200RT
Been liked: 192 times
Great Britain

Re: Ceramic Coated my '23 RT

Post by burridge01 »

Motor32 wrote: Sat May 06, 2023 11:06 pm After detailing my RT, I ceramic coated it with Avalon King Armor Shield IX. Very easy to do, (wipe on, let sit for a minute or so, and wipe off) it's that easy. The finish looks like a wet clear-coat and is supposed to last two years. I did everything, the paint, black plastic, windshield on both sides, rims, cables, frame, exhaust, and my helmets, it looks great.

Steve

https://avalonking.com/products/armor-shield-ix-diy-kit


[url]
I've taken the plunge and bought some.They do a silly quiz on there that gives a bit of discount so I got the pre shampoo/wash and micro wipes,came in at £85 odd with free delivery.Was a little hesitant at 1st because I have paint protection film on a few bits but the blurb says it's compatible. Also looked around the Web and it gets good reviews.
Motor32
Posts: 91
Joined: Mon Sep 21, 2020 9:26 pm
Bike Model and Year: R1250RT '23
Has liked: 2 times
Been liked: 10 times
United States of America

Re: Ceramic Coated my '23 RT

Post by Motor32 »

Well worth the price, you'll love how it makes the bike look.

Steve
burridge01
Posts: 559
Joined: Tue Jul 02, 2019 11:25 am
Location: Basildon, Essex
Bike Model and Year: Modified "16" R1200RT
Been liked: 192 times
Great Britain

Re: Ceramic Coated my '23 RT

Post by burridge01 »

Cheers Steve,I did have a good look on the Web beforehand so hoping for good results :thumb:
burridge01
Posts: 559
Joined: Tue Jul 02, 2019 11:25 am
Location: Basildon, Essex
Bike Model and Year: Modified "16" R1200RT
Been liked: 192 times
Great Britain

Re: Ceramic Coated my '23 RT

Post by burridge01 »

The stuff has turned up :thumb:
Image

I have a question, did anyone have film protection on the panniers.Do you leave it on or peel it off,not keen on removing it.
Motor32
Posts: 91
Joined: Mon Sep 21, 2020 9:26 pm
Bike Model and Year: R1250RT '23
Has liked: 2 times
Been liked: 10 times
United States of America

Re: Ceramic Coated my '23 RT

Post by Motor32 »

Good luck, I think you'll be impressed. I just did my car and it looks great.

Steve

User avatar
Steve398
Posts: 694
Joined: Thu Jul 11, 2019 8:41 pm
Location: West Sussex, UK
Bike Model and Year: R1200RTLC, 2018
Has liked: 261 times
Been liked: 218 times
Isle of Wight

Re: Ceramic Coated my '23 RT

Post by Steve398 »

I had a neighbour who used to work for Bentley, gave me a a bottle of badged ceramic coating… perhaps I ought to give it a try?
Motor32
Posts: 91
Joined: Mon Sep 21, 2020 9:26 pm
Bike Model and Year: R1250RT '23
Has liked: 2 times
Been liked: 10 times
United States of America

Re: Ceramic Coated my '23 RT

Post by Motor32 »

Steve398 wrote: Tue May 30, 2023 9:42 pm I had a neighbour who used to work for Bentley, gave me a a bottle of badged ceramic coating… perhaps I ought to give it a try?
It's really amazing, how shiny it is.

Steve
burridge01
Posts: 559
Joined: Tue Jul 02, 2019 11:25 am
Location: Basildon, Essex
Bike Model and Year: Modified "16" R1200RT
Been liked: 192 times
Great Britain

Re: Ceramic Coated my '23 RT

Post by burridge01 »

I needed to find out about covering the protective film on the panniers and found this blurb
https://uk.avalonking.com/blogs/news/ul ... d-scooters

Says its OK with the film :thumb:

If anything comes close and is stationary for more than 10 seconds,it's getting coated :mrgreen:
Motor32
Posts: 91
Joined: Mon Sep 21, 2020 9:26 pm
Bike Model and Year: R1250RT '23
Has liked: 2 times
Been liked: 10 times
United States of America

Re: Ceramic Coated my '23 RT

Post by Motor32 »

burridge01 wrote: Wed May 31, 2023 9:23 am I needed to find out about covering the protective film on the panniers and found this blurb
https://uk.avalonking.com/blogs/news/ul ... d-scooters

Says its OK with the film :thumb:

If anything comes close and is stationary for more than 10 seconds,it's getting coated :mrgreen:
I did everything but the seat and tires. FYI, use a foam paint-brush in order to get the tight spots.

Steve
Post Reply