Cleaning Alloy Wheels
-
- Posts: 21
- Joined: Mon Mar 27, 2023 1:39 am
- Bike Model and Year: 1200RT - 2012
- Has liked: 21 times
- Been liked: 2 times
Cleaning Alloy Wheels
I have factory alloy wheels on my RT. They appear to be a light grey painted finish. I've been cleaning the wheels starting with slightly soapy water which removed dust and grime. Then I used a rag lightly dampened with some turpentine to easily remove tar spots. Then things got more difficult. I still have some "stains" which I was able to have limited success with a conventional auto polish. Anybody got ideas to remove the remaining marks / stains? I suspect these have resulted from bugs gizzards that were left on the surface for too long.
-
- Posts: 66
- Joined: Fri Oct 14, 2022 8:19 am
- Location: Aberdeenshire
- Bike Model and Year: R1250RT 2021
- Has liked: 25 times
- Been liked: 29 times
Re: Cleaning Alloy Wheels
Fwiw - my advice would be don't try to keep them in mint condition. Doing that may well involve removing some of the overpaint protection thereby exposing fresh and less well protected paintwork to further damage and each time you really put the elbow grease into it the deterioration rate will probably accelerate. My wife reckons every time she washes my favourite jumper it gets dirtier quicker and started looking tatty really fast.
Don't sweat it.
If it looks nice and clean - that'll do.
Sorry if that's not what you wanted to hear! Good luck.
Don't sweat it.
If it looks nice and clean - that'll do.
Sorry if that's not what you wanted to hear! Good luck.
-
- Posts: 21
- Joined: Mon Mar 27, 2023 1:39 am
- Bike Model and Year: 1200RT - 2012
- Has liked: 21 times
- Been liked: 2 times
Re: Cleaning Alloy Wheels
Good advice - I agree!Excellence wrote: ↑Thu Apr 20, 2023 7:43 pm Fwiw - my advice would be don't try to keep them in mint condition. Doing that may well involve removing some of the overpaint protection thereby exposing fresh and less well protected paintwork to further damage and each time you really put the elbow grease into it the deterioration rate will probably accelerate. My wife reckons every time she washes my favourite jumper it gets dirtier quicker and started looking tatty really fast.
Don't sweat it.
If it looks nice and clean - that'll do.
Sorry if that's not what you wanted to hear! Good luck.
- ald71
- Subscriber
- Posts: 40
- Joined: Thu Oct 05, 2023 10:01 pm
- Location: West Yorkshire UK
- Bike Model and Year: R1250RTLE 2020
- Has liked: 6 times
- Been liked: 8 times
Re: Cleaning Alloy Wheels
Hi,
AutoGlym alloy wheel cleaner did a good job on my RT when I got it. The wheels had been coated wit ACF 50 which had gone hard and very dark and crusty, a couple of goes with the cleaner and an old tooth brush got them up to scratch.
AutoGlym alloy wheel cleaner did a good job on my RT when I got it. The wheels had been coated wit ACF 50 which had gone hard and very dark and crusty, a couple of goes with the cleaner and an old tooth brush got them up to scratch.
ald71
BSA 175 Bantam 1960 Ish
Honda CD175 1972
Suzuki GT550 1974
Suzuki GT750 A 1975
Suzuki GS750 1977
Suzuki GS850 1979
Kawasaki ZZR1400 2010
Kawasaki ZZR1400 2013
BMW R1200RSSE 2016
BMW R1250RTLE 2020
![Cool 8-)](./images/smilies/icon_cool.gif)
BSA 175 Bantam 1960 Ish
Honda CD175 1972
Suzuki GT550 1974
Suzuki GT750 A 1975
Suzuki GS750 1977
Suzuki GS850 1979
Kawasaki ZZR1400 2010
Kawasaki ZZR1400 2013
BMW R1200RSSE 2016
BMW R1250RTLE 2020
![Cool 8-)](./images/smilies/icon_cool.gif)
- Steve398
- Posts: 735
- Joined: Thu Jul 11, 2019 8:41 pm
- Location: West Sussex, UK
- Bike Model and Year: R1200RTLC, 2018
- Has liked: 281 times
- Been liked: 240 times
Re: Cleaning Alloy Wheels
I’m from the ‘keep them clean’ camp…
When I first got the bike the wheels were not great but some car wheel cleaner removed the brake deposits, then it was a wash after each ride.
TBH I haven’t noticed any staining on the wheels after this regime.
![Laughing :lol:](./images/smilies/icon_lol.gif)
When I first got the bike the wheels were not great but some car wheel cleaner removed the brake deposits, then it was a wash after each ride.
TBH I haven’t noticed any staining on the wheels after this regime.
- Doctor T
- Posts: 1673
- Joined: Tue Dec 21, 2021 10:21 pm
- Location: west sussex
- Bike Model and Year: 2007 R1200RT SE
- Has liked: 911 times
- Been liked: 239 times
Re: Cleaning Alloy Wheels
Mine are flaky and cruddy. Stops me worrying about keeping them clean
Trust me I am a retired Doctor and lecturer at Oxford University of Structural and Mechanical/Electrical engineering.
-
- Posts: 7
- Joined: Fri Apr 23, 2021 10:53 pm
- Location: Perkiomenville PA
- Bike Model and Year: RT1250 2021
- Has liked: 1 time
- Been liked: 3 times
Re: Cleaning Alloy Wheels
Hydrogen peroxide is a very effective bug body remover. Spray a bit on bug remains, wait a couple of minutes, wipe off the mess. Works quite well on windscreens or any area that collects bug remains, Keep it in a dark container, as exposure to light will quickly turn it into plain H2O.
- Doctor T
- Posts: 1673
- Joined: Tue Dec 21, 2021 10:21 pm
- Location: west sussex
- Bike Model and Year: 2007 R1200RT SE
- Has liked: 911 times
- Been liked: 239 times
Re: Cleaning Alloy Wheels
Hydrogen peroxide is also great for making bombs. Baby wipes are brilliant for getting bug from the screen and helmet visor
Trust me I am a retired Doctor and lecturer at Oxford University of Structural and Mechanical/Electrical engineering.
-
- Posts: 140
- Joined: Tue Aug 02, 2022 9:25 pm
- Location: Shropshire
- Bike Model and Year: R1250RT LE - '18
- Has liked: 6 times
- Been liked: 60 times
Re: Cleaning Alloy Wheels
I've used Autoglym Engine & Machine cleaners and got good results.
https://www.amazon.co.uk/dp/B001AZE5WS? ... tails&th=1
https://www.amazon.co.uk/dp/B001AZE5WS? ... tails&th=1