Recall work
-
sakm
- Administrator
- Posts: 1324
- Joined: Wed Jun 02, 2021 9:13 pm
- Location: Hull, UK
- Bike Model and Year: 2016 R1200RT
- Has liked: 452 times
- Been liked: 396 times
-
sakm
- Administrator
- Posts: 1324
- Joined: Wed Jun 02, 2021 9:13 pm
- Location: Hull, UK
- Bike Model and Year: 2016 R1200RT
- Has liked: 452 times
- Been liked: 396 times
Re: Recall work
It's too far out the way to get to anywhere decent!
And I'm not getting the bus while I wait
-
burridge01
- Posts: 585
- Joined: Tue Jul 02, 2019 11:25 am
- Location: Basildon, Essex
- Bike Model and Year: Modified "16" R1200RT
- Been liked: 194 times
Re: Recall work
Shirley a curtesy bike will be in order,promise to bring em back a bag of scraps n chips to share round
-
sakm
- Administrator
- Posts: 1324
- Joined: Wed Jun 02, 2021 9:13 pm
- Location: Hull, UK
- Bike Model and Year: 2016 R1200RT
- Has liked: 452 times
- Been liked: 396 times
Re: Recall work
Fair point well presentedburridge01 wrote: ↑Wed Mar 27, 2024 12:57 pm Shirley a curtesy bike will be in order,promise to bring em back a bag of scraps n chips to share round
-
7vwh
- Subscriber
- Posts: 244
- Joined: Thu Jul 31, 2014 9:16 pm
- Location: East Yorkshire, UK
- Bike Model and Year: R1200RT 2014
- Has liked: 12 times
- Been liked: 33 times
Re: Recall work
Sadly, I have to retract my good words about Barrie Robson. I needed to take the weather protection and lower panels off last Friday and the securing bolts were all wrong for the relevant holes (incorrect lengths for the position). One on the offside down near the centre stand was so tight it rounded off and I had to cut away the plastic weather protection panel to get mole grips on it.
Today on a ride to the dales I noticed one of the engine/cylinder guard cover bolts was hanging out, totally loose.
All bolts would have been undone for the valve clearance check I took the bike in for originally.
Lesson learnt to always check after someone else has had their hands on her.
-
Steve398
- Posts: 732
- Joined: Thu Jul 11, 2019 8:41 pm
- Location: West Sussex, UK
- Bike Model and Year: R1200RTLC, 2018
- Has liked: 278 times
- Been liked: 238 times
Re: Recall work
That’s abysmal!
After Bahnstormers completed the repair/replacement I noticed that the fasteners that they had removed all had orange marker dots on them, presumably to visually indicate to the mechanic that they had been correctly torqued before handing the bike back to the owner.
It’s certainly reassuring for if/when I need to have work done there in the future.
After Bahnstormers completed the repair/replacement I noticed that the fasteners that they had removed all had orange marker dots on them, presumably to visually indicate to the mechanic that they had been correctly torqued before handing the bike back to the owner.
It’s certainly reassuring for if/when I need to have work done there in the future.
-
sakm
- Administrator
- Posts: 1324
- Joined: Wed Jun 02, 2021 9:13 pm
- Location: Hull, UK
- Bike Model and Year: 2016 R1200RT
- Has liked: 452 times
- Been liked: 396 times
Re: Recall work
I have used marshall bmw in Grimsby before with no issues so that will be my choosen dealership from here on if I ever need any work done