I'm looking to put crash bars/engine guards on my RT. I've found one piece bars that look to be extensive to put on, and I've found the left/right side bars that simply just attach to the bike.
My question would be for the left/right set. Will highway pegs fit on these very well? I ride my RT weeks at a time and would like to stretch the legs once in a while.
Thanks!
Highway Pegs on Crash bars
- Mars Red Ken
- Posts: 4
- Joined: Mon Apr 03, 2023 4:36 am
- Location: Southwest Ohio
- Bike Model and Year: R1250RT 2019
- Has liked: 3 times
- Been liked: 1 time
- Randyjaco
- Posts: 235
- Joined: Thu Nov 11, 2021 3:18 am
- Location: Friendswood, Texas, USA
- Bike Model and Year: R1200RT 2017
- Has liked: 56 times
- Been liked: 49 times
Re: Highway Pegs on Crash bars
I got a pair off AliExpress a couple of years ago, and they have worked well. It took a little fiddling to get them adjusted right.
I couldn't find them tonight, but here is a similar pair on eBay.
https://www.ebay.com/itm/353466710905?i ... R96LjJu3Yw
I couldn't find them tonight, but here is a similar pair on eBay.
https://www.ebay.com/itm/353466710905?i ... R96LjJu3Yw
-
- Posts: 56
- Joined: Thu Jun 29, 2023 2:13 am
- Bike Model and Year: 2021 R1250RT
- Has liked: 1 time
- Been liked: 9 times
-
- Posts: 18
- Joined: Tue Mar 14, 2017 6:26 pm
- Location: Little Rock Arkansas
- Bike Model and Year: 2023 R1250RT
- Has liked: 4 times
- Been liked: 3 times
Re: Highway Pegs on Crash bars
I just finished putting some Farkles on my 23 R1250RT "night fighter" Among those were Crash bars (made by Baione) and ilium Highway pegs. While the pegs are expensive (took them off a previous 16 R1200RT) and I will someday put black ones on the black Crash bars. Until then, these will do just fine mulitple adjustment angles can be made. I think my mods turned out pretty good
- Attachments
-
- Right Hiway peg on Baione Crash bars.jpg (259.16 KiB) Viewed 9654 times
-
- Left fwd crash bar and Highway peg.jpg (265.31 KiB) Viewed 9654 times
-
- Front view of the night fighter with mods completed.jpg (347.69 KiB) Viewed 9654 times
-
- Front Replacing Clear handguard windshields Left side black the right side original clear.jpg (334.66 KiB) Viewed 9654 times
2023 R1250RT
2022 R1800TC gone
2016 R1200RT w/c gone
2014 K100GTL (gone)
2014 R1200RT w/c (gone)
2005 R1200RT Hex head (gone)
2022 R1800TC gone
2016 R1200RT w/c gone
2014 K100GTL (gone)
2014 R1200RT w/c (gone)
2005 R1200RT Hex head (gone)
Re: Highway Pegs on Crash bars
A word of caution. My 2019 came with Wunderlich bars and plastic valve cover protection. This combination leaves little to no room for foot pegs to attach.
-
- Posts: 4
- Joined: Mon Sep 23, 2024 12:03 pm
- Bike Model and Year: 2024 R 1250 RT
- Has liked: 4 times
- Been liked: 3 times
Re: Highway Pegs on Crash bars
Hi,
I have the Wunderlich crash bars and the wunderlich highway pegs. Just mounted the pegs on the crashbars but they don't seem to stay in place and keep rotating if I place my feet on them.
Any ideas on what I should install between the pegs and the bars? Mayne some rubber material with 3M sticky tape or something?
How do you guys manage to keep the pegs stay "seated" in place?
Thanks
I have the Wunderlich crash bars and the wunderlich highway pegs. Just mounted the pegs on the crashbars but they don't seem to stay in place and keep rotating if I place my feet on them.
Any ideas on what I should install between the pegs and the bars? Mayne some rubber material with 3M sticky tape or something?
How do you guys manage to keep the pegs stay "seated" in place?
Thanks
- Doctor T
- Posts: 2062
- Joined: Tue Dec 21, 2021 10:21 pm
- Location: west sussex
- Bike Model and Year: 2007 R1200RT SE
- Has liked: 1189 times
- Been liked: 326 times
Re: Highway Pegs on Crash bars
I just used Gorilla tape to pad the area out. Can't see it and works a treat
Trust me I am a retired Doctor and lecturer at Oxford University of Structural and Mechanical/Electrical engineering.
"Blessed are the cracked, for they shall let in the light". Groucho Marx
"Blessed are the cracked, for they shall let in the light". Groucho Marx
-
- Posts: 3
- Joined: Sat Nov 16, 2024 2:46 am
- Bike Model and Year: R1200RT/17
- Been liked: 1 time
Re: Highway Pegs on Crash bars
No expert but a tinker and (perhaps) think too much. But this is what I would do.SenorPink wrote: ↑Thu Sep 26, 2024 2:51 pm Hi,
I have the Wunderlich crash bars and the wunderlich highway pegs. Just mounted the pegs on the crashbars but they don't seem to stay in place and keep rotating if I place my feet on them.
Any ideas on what I should install between the pegs and the bars? Mayne some rubber material with 3M sticky tape or something?
How do you guys manage to keep the pegs stay "seated" in place?
Thanks
Pre: put bike on center stand and loosely fit pegs ergonomics to your riding position. Once determined the best location;
UNO (1) I would protect the bar with electric tape (these days you can find it in any color you might think works for your bars).
DOS (2) I would find a double hook velcro tape option to create a stronger bond.
TRES (3) brace the peg around (2) and tight accordingly.
-
- Posts: 4
- Joined: Mon Sep 23, 2024 12:03 pm
- Bike Model and Year: 2024 R 1250 RT
- Has liked: 4 times
- Been liked: 3 times
-
- Posts: 4
- Joined: Mon Sep 23, 2024 12:03 pm
- Bike Model and Year: 2024 R 1250 RT
- Has liked: 4 times
- Been liked: 3 times
Re: Highway Pegs on Crash bars
NoWilliesHere wrote: ↑Sat Nov 16, 2024 3:50 am No expert but a tinker and (perhaps) think too much. But this is what I would do.
Pre: put bike on center stand and loosely fit pegs ergonomics to your riding position. Once determined the best location;
UNO (1) I would protect the bar with electric tape (these days you can find it in any color you might think works for your bars).
DOS (2) I would find a double hook velcro tape option to create a stronger bond.
TRES (3) brace the peg around (2) and tight accordingly.
Hi,
I followed Doctor T's advice and used Gorilla Tape which seems to work perfectly so far.