Final Drive Overhaul

Having Problems with your BMW R1200RT/R1250RT? or have some Maintenance and Service questions?
Post Reply
User avatar
David.
Subscriber
Posts: 8007
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 332 times
Great Britain

Final Drive Overhaul

Post by David. »

Some of the Final Drive Casing Bolts on my 2012 RT are slightly corroded, having given them a clean with Solvol Autosol , a toothbrush & some 00 grade wire wool, then a squirt of ACF-50, they are looking more acceptable.

Also, on the inside of the FD Unit, (silver part behind the disc),  the paint finish looks rough but not broken, don't know if this is just a poor casting or something going on underneath the paint.

Doing a bit of research "Google", has come up with Mike Overy of Overland & Classic, he overhauls FD Units.

Having spoken to Mike, he is happy for his details to be posted here.
His Workshop is at, Hall Farm, Holwell, nr Melton Mowbray, LE14 4SZ.
Mobile No. 07786 340692.

It's nice to know, there is someone out there, who can Overhaul FD Units if necessary.

If the Casing Bolts are changed, Mike suggested a Torque setting of 30Nm.
For the record, the bolts are £1.70 each x 10 off, http://www.realoem.com/bmw/enUS/part?id ... 3117686682
I'd be looking at getting some Stainless Steel ones from a local supplier.

Here is a thread posted by Mike on Adventure Bike Rider, showing the Overhaul of a FD Unit,
http://www.adventurebikerider.com/forum ... rhaul.html

If nothing else, it may be worth posting the details for future reference.
Last edited by David. on Wed Nov 11, 2015 5:18 pm, edited 1 time in total.
User avatar
David.
Subscriber
Posts: 8007
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 332 times
Great Britain

Re: Final Drive Overhaul

Post by David. »

This photo shows an example of a particularly "grubby" Final Drive Unit, the bolts can be clearly seen, (not 2012).

Image
Last edited by David. on Sat Jan 30, 2016 7:19 pm, edited 1 time in total.
beemerboy9
Posts: 582
Joined: Sun Jan 31, 2016 9:44 am
Location: North London
Bike Model and Year: 1250RT 2019
Been liked: 16 times
Great Britain

Re: Final Drive Overhaul

Post by beemerboy9 »

Steve Grover (Motoscot near Dunstable) overhauled my FD unit. Apparently the trick is to shim the bearings "just right".


A BMW Dealer will do the same job, but I am not sure that the specified workshop time for the task according to BMW would allow them to take the same sort of care.
John Bentall
User avatar
David.
Subscriber
Posts: 8007
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 332 times
Great Britain

Re: Final Drive Overhaul

Post by David. »

beemerboy9 wrote:Steve Grover (Motoscot near Dunstable)
http://www.motoscot.co.uk/
User avatar
David.
Subscriber
Posts: 8007
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 332 times
Great Britain

Re: Final Drive Overhaul

Post by David. »

Although not in English, this video shows one method of replacing the Rear Wheel Flange, https://www.youtube.com/watch?v=veilFcDC2zc
User avatar
David.
Subscriber
Posts: 8007
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 332 times
Great Britain

Re: Final Drive Overhaul

Post by David. »

David. wrote:Some of the Final Drive Casing Bolts on my 2012 RT are slightly corroded, having given them a clean with Solvol Autosol , a toothbrush & some 00 grade wire wool, then a squirt of ACF-50, they are looking more acceptable.
Decided to "bite the bullet" & change the FD casing bolts, probably a timely task, some of the threads/holes were certainly badly corroded.

Stig Fasteners came up trumps, got 10 off M8 x 30 Stainless Steel Socket Button Screws & Washers for £4.00.

At £2.30 each, that's £23.00 for BMW bolts that corrode.
Last edited by David. on Fri Sep 29, 2017 4:34 pm, edited 1 time in total.
Post Reply