Rear disc brake pads

Having Problems with your BMW R1200RT/R1250RT? or have some Maintenance and Service questions?
User avatar
Highlandbear
Posts: 52
Joined: Wed Sep 23, 2015 9:29 am

Rear disc brake pads

Post by Highlandbear »

Rear pads getting near sell by date ,best to get done before the hollybobs, will the wheel come of past the exhaust ?or does it have to come off first or at least be moved a bit
Dave F
T6pilot
Posts: 574
Joined: Sat Jun 27, 2015 6:12 am
Been liked: 1 time

Re: Rear disc brake pads

Post by T6pilot »

One forum says pads can be replaced with wheel on
Another says if bike lifted enough rear wheel come off without removing tail pipe
I'am leaning towards just removing left bag and giving it a go
Jim
User avatar
Levisp
Posts: 1114
Joined: Sun Aug 31, 2014 12:57 pm

Re: Rear disc brake pads

Post by Levisp »

What bike ?

User avatar
Highlandbear
Posts: 52
Joined: Wed Sep 23, 2015 9:29 am

Re: Rear disc brake pads

Post by Highlandbear »

R1200RT 2006 model
Dave F
User avatar
Levisp
Posts: 1114
Joined: Sun Aug 31, 2014 12:57 pm

Re: Rear disc brake pads

Post by Levisp »

OK thanks sorry cannot help you not familiar with your model.
guest2360

Re: Rear disc brake pads

Post by guest2360 »

Just undo the rear clamp on the end can and loosen the front one. It will then twist out enough to get the wheel,out. 
Would advise against replacing the pads with anything but OEM ones.  Some aftermarket ones can seriously reduce the life of the disc.
While you there check that the rear spacer (the big lump of metal the wheel bolts to) looks newer than everything around it.  They were originally made of alloy but due to over tightening these could crack. BMWs solution to this was to replace the lot world wide with a steel version.  If your not sure any dealer can tell you if it's been done.  It's a totally free recall.  If it's not been done get them to swap your pads at the same time. probably be labour free.
Last edited by guest2360 on Sun Mar 20, 2016 6:48 pm, edited 1 time in total.
User avatar
David.
Subscriber
Posts: 8007
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 332 times
Great Britain

Re: Rear disc brake pads

Post by David. »

Highlandbear wrote:Will the wheel come of past the exhaust or does it have to come off first or at least be moved a bit.
Removing the exhaust, gets it out of the way before the wheel is removed, https://www.youtube.com/watch?v=wZCC_r-u5-c
User avatar
Highlandbear
Posts: 52
Joined: Wed Sep 23, 2015 9:29 am

Re: Rear disc brake pads

Post by Highlandbear »

Thanks for info will get local dealer a call and get them to check
Appreciated
Dave F
User avatar
David.
Subscriber
Posts: 8007
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 332 times
Great Britain

Re: Rear disc brake pads

Post by David. »

This video shows the rear brake pads being replaced on a GS, https://www.youtube.com/watch?v=8EcmXRdnTM4

It gives a good idea of what to do, but I wouldn't let this guy lose on my bike.
guest2360

Re: Rear disc brake pads

Post by guest2360 »

Highlandbear wrote: Thanks for info will get local dealer a call and get them to check
Appreciated
Have your VIN number to hand
User avatar
David.
Subscriber
Posts: 8007
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 332 times
Great Britain

Re: Rear disc brake pads

Post by David. »

Although my 2012 RT is not included in the Rear Wheel Flange Recall, decided to check it, a magnet proved it to be Steel not Aluminium.
guest2360

Re: Rear disc brake pads

Post by guest2360 »

Think the recall effected R and K models between 2003 and 2011.
User avatar
David.
Subscriber
Posts: 8007
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 332 times
Great Britain

Re: Rear disc brake pads

Post by David. »

The recall was issued in the UK in April 2015, hopefully, any bikes which have been to a BMW Dealer since then will have been checked.

This is the D&VSA Recall Details, no VIN No. listed,
http://www.dft.gov.uk/vosa/apps/recalls ... =0.5102307
Last edited by David. on Sun Mar 20, 2016 8:53 pm, edited 1 time in total.
User avatar
Highlandbear
Posts: 52
Joined: Wed Sep 23, 2015 9:29 am

Re: Rear disc brake pads

Post by Highlandbear »

Checked the hub has been done , anyone know torque setting for wheel bolts of the top of there head ?
While in below last night checking appears a leak has developed since the weekend run out Arghh !!
Dave F
guest2360

Re: Rear disc brake pads

Post by guest2360 »

If you are talking about the rear hub it depends where it's leaking from.  There is a seal behind the black disk on the hole . If it's leaking there it's an easy fix at a dealer.  From anywhere else not quite so easy.  In all cases I would visit a dealer, not poke about trying to find it.
Post Reply