Tighten your caps!

Got any tips and tricks for BMW R1200RT/R1250RT owners? feel free to share them here.
Nobby
Posts: 44
Joined: Sun Mar 27, 2016 7:18 pm

Tighten your caps!

Post by Nobby »

I noticed yesterday that I'd lost the black plastic cap that is screwed onto the end of the lower pannier mounting outrigger.  I then checked the one on the other side and both screws were loose so I removed it completely before the cap fell off and went the way of the one on the other side.


So the moral of the story is, dab a little Loctite on the screw threads and make sure they never vibrate out again!  A replacement is on order.


(apologies in advance for the state of the bike - its seen a fair amount of wet roads lately!)
Attachments
IMG_1084.jpg
guest2360

Re: Tighten your caps!

Post by guest2360 »

This came up here a couple of months ago and lots of us found them loose.  Do you ride with the panniers off.  There is a gap in the pannier lug where the bung fits but I don't think big enough to allow it to fall off.
T6pilot
Posts: 574
Joined: Sat Jun 27, 2015 6:12 am
Been liked: 1 time

Re: Tighten your caps!

Post by T6pilot »

I checked the screws on my 15 with 4500 miles, all were loose
Buddies new 16 all were loose
Jim
Nobby
Posts: 44
Joined: Sun Mar 27, 2016 7:18 pm

Re: Tighten your caps!

Post by Nobby »

T6pilot wrote: I checked the screws on my 15 with 4500 miles, all were loose
Buddies new 16 all were loose

Yes, I ride with them off.  I don't need the storage on a day to day basis so I leave them off to prevent potential filtering damage.
Steve F
Posts: 673
Joined: Thu Aug 27, 2015 2:56 pm
Bike Model and Year: R1250RT 2022
Great Britain

Re: Tighten your caps!

Post by Steve F »

Erm....if you can fit the handlebars through when filtering, then the panniers will fit as well..! ???
User avatar
richardbd
Posts: 1468
Joined: Sat Dec 13, 2014 8:40 pm
Been liked: 2 times

Re: Tighten your caps!

Post by richardbd »

Steve F wrote: Erm....if you can fit the handlebars through when filtering, then the panniers will fit as well..! ???

Maybe Nobby takes the bar ends off as well...
User avatar
Tango
Posts: 80
Joined: Tue Mar 01, 2016 8:38 pm

Re: Tighten your caps!

Post by Tango »

wrap some tape around the screw heads, won't stop them coming loose, but may prevent loss.
Attachments
WP_20160518_09_43_46_Pro.jpg
guest2360

Re: Tighten your caps!

Post by guest2360 »

Sensible suggestion.  I'll go and find some black tape.
User avatar
richardbd
Posts: 1468
Joined: Sat Dec 13, 2014 8:40 pm
Been liked: 2 times

Re: Tighten your caps!

Post by richardbd »

Tango wrote: wrap some tape around the screw heads, won't stop them coming loose, but may prevent loss.

Or even better, leave the panniers on and ride the bike in the way it look the best!


;)
Liverpool Brick
Posts: 45
Joined: Wed May 04, 2016 3:27 pm

Re: Tighten your caps!

Post by Liverpool Brick »

[size=2px]Or even better, leave the panniers on and ride the bike in the way it look the best![/size][size=2px]
Good point! I've only just got my RT and I'm looking at with panniers on and off and it looks wrong without them. Too fat at the front? My beloved K75S definitely looks good without them but not the RT. Sorry to change the subject.
Andy
1991 K75S, 2011 R1200RT SE
User avatar
Levisp
Posts: 1114
Joined: Sun Aug 31, 2014 12:57 pm

Re: Tighten your caps!

Post by Levisp »

Whats wrong with thread lock
User avatar
richardbd
Posts: 1468
Joined: Sat Dec 13, 2014 8:40 pm
Been liked: 2 times

Re: Tighten your caps!

Post by richardbd »

Liverpool Brick wrote: Good point! I've only just got my RT and I'm looking at with panniers on and off and it looks wrong without them. Too fat at the front? My beloved K75S definitely looks good without them but not the RT. Sorry to change the subject.
Andy

Don't worry about changing the subject Andy.


I'm all in favour of threads about what make the RT look best!


8) 8) 8)
Steve F
Posts: 673
Joined: Thu Aug 27, 2015 2:56 pm
Bike Model and Year: R1250RT 2022
Great Britain

Re: Tighten your caps!

Post by Steve F »

Levisp wrote: Whats wrong with thread lock
Yes, exactly. It strikes me that's a better, neater solution to solving this loose screw issue. ???
guest2360

Re: Tighten your caps!

Post by guest2360 »


Yes, exactly. It strikes me that's a better, neater solution to solving this loose screw issue. ???

Too late now.  I've covered mine in sticky black tape. 
User avatar
Attackpug
Posts: 10
Joined: Fri Jul 08, 2016 3:22 am

Re: Tighten your caps!

Post by Attackpug »

Where did I put the bailing wire
Post Reply