Page 1 of 1

Cylinder protector advice needed

Posted: Wed Jul 27, 2016 8:45 am
by ds99
I have just got a 2007 R1200RT (here in the UK) and am seeking advice what the best cylinder protectors are. Some appear to be metal, some plastic. How easy are they to fit? Do you need to take any fairing off etc etc?


Thanks

Re: Cylinder protector advice needed

Posted: Wed Jul 27, 2016 9:07 am
by guest2360
Just put on the OEM plastic ones.  They re very strong , easy to fit and do the job.  You don't need to take anything  off to fit them .

Re: Cylinder protector advice needed

Posted: Wed Jul 27, 2016 10:58 am
by ds99
ok, thanks. can anyone supply a link to the correct ones i need? i've looked on the motorworks website, but being a BMW newbie I don't really know what I'm looking for.

Re: Cylinder protector advice needed

Posted: Wed Jul 27, 2016 11:10 am
by Sullivj
I got these on Ebay for Euro70. 

http://www.ebay.co.uk/itm/262518154610? ... EBIDX%3AIT

Better than the £96 that the dealer wanted for the same thing.  I've not fitted them yet though.  I 'think' you have to remove the fairing to properly torque up the bolts. 

Re: Cylinder protector advice needed

Posted: Wed Jul 27, 2016 11:19 am
by ds99
ah, according to the ebay listing they do not fit a 2007 R1200RT

Re: Cylinder protector advice needed

Posted: Wed Jul 27, 2016 1:40 pm
by bieffe
Hi, I have this on my 2007 1200 rt.
http://www.ebay.co.uk/itm/252465205603

Re: Cylinder protector advice needed

Posted: Thu Jul 28, 2016 1:20 pm
by Stratman
I have just taken delivery of the OEM ones from Motorworks and was quite pleased to find that just by removing the bottom fairing screws I had access to the M6 torx bolts; I was less happy to find that I needed longer ones to fit the protectors which weren't supplied, so I've had to buy some 20mm long ones from ebay.

Re: Cylinder protector advice needed

Posted: Thu Jul 28, 2016 1:54 pm
by guest2360
The proper set come with all the necessary fittings.  Good old Motorwotks.