Re: Turning alarm off
Posted: Sun Apr 30, 2017 9:07 pm
axamax wrote: If the same as the 2012 RT:
Ignition ON
Press button 1(Ribbed) 3 times will get you a tone.
within ten seconds turn Ignition OFF
Press button 2(Smooth) 3 times will get you a tone
Within Ten seconds turn Igniton ON gets 3 tones
You are now in programming mode
Confirmation tone when alarm activated Button 1 for yes, Button 2 for no
Then Press either button once
Which alarm tone ? Rising and falling Button 1, Intermittent Button 2
Alarm to come on with ignition turns off? Button 1 for YES, Button 2 for NO
Then turn ignition off.
I've still got the book.
Axamax
That's good info, Thanks for sharing
[size=78%] I usually press the smooth button 3 times straight after switching the ignition off and it seems to put it in ferry mode. Or is it the ribbed button? Doh! Can't remember? I usually do it a couple of times before I get it right anyway! Handy for washing or doing maintenance on the bike. I think you get 3 bleeps instead of the two alarm set bleeps. [/size]