Re: Which Fairing Bolts
Posted: Sat Jul 22, 2023 8:52 pm
Tried to download pdf but nothing came up?
I tried several times to download this file. After downloading, it wouldn't open. It stated that the file was corrupted
BMW R1200RT/R1250RT Forum
A forum community dedicated to BMW R 1200 RT/R 1250 RT motorcycle owners and enthusiasts. Come join the discussion.
https://www.1200rt.com/
Which Fairing Bolts
Page 2 of 2
Re: Which Fairing Bolts
Posted: Sat Jul 22, 2023 11:53 pm
Re: Which Fairing Bolts
Posted: Mon Jul 24, 2023 9:09 am
Same thing for me 
Re: Which Fairing Bolts
Posted: Mon Jul 24, 2023 11:13 am
It's and old file and as such may have been deleted in the past
I will have a look to see if it's is in the system and just not linked properly from the conversion to the new software
I will have a look to see if it's is in the system and just not linked properly from the conversion to the new software
Re: Which Fairing Bolts
Posted: Mon Jul 24, 2023 1:18 pm
If you have a WetHead 1200, this shop aid will help. It keeps your screws from being lost and reminds you of not putting back all the screws and where they should go if you have some left over on reassembly.
I take this file to my local FedEx Office printing location and have them print it out 12x18in (about 30x45cm) then I use spray glue to stick it to 2 thicknesses of foam core board from an art supply store.
Just stick the screw into the soft board right next to the location it came out of on the bike and reference the correct screw that is supposed to be there.
https://drive.google.com/file/d/1-kgaPF ... drive_link Left Hand Side
https://drive.google.com/file/d/18HbJdS ... drive_link Right Hand Side
I take this file to my local FedEx Office printing location and have them print it out 12x18in (about 30x45cm) then I use spray glue to stick it to 2 thicknesses of foam core board from an art supply store.
Just stick the screw into the soft board right next to the location it came out of on the bike and reference the correct screw that is supposed to be there.
https://drive.google.com/file/d/1-kgaPF ... drive_link Left Hand Side
https://drive.google.com/file/d/18HbJdS ... drive_link Right Hand Side
Re: Which Fairing Bolts
Posted: Mon Mar 18, 2024 12:51 pm
Thanks for sharing, does anybody have this for a '21 RT?Boxflyer wrote: ↑Mon Jul 24, 2023 1:18 pm If you have a WetHead 1200, this shop aid will help. It keeps your screws from being lost and reminds you of not putting back all the screws and where they should go if you have some left over on reassembly.
I take this file to my local FedEx Office printing location and have them print it out 12x18in (about 30x45cm) then I use spray glue to stick it to 2 thicknesses of foam core board from an art supply store.
Just stick the screw into the soft board right next to the location it came out of on the bike and reference the correct screw that is supposed to be there.
https://drive.google.com/file/d/1-kgaPF ... drive_link Left Hand Side
https://drive.google.com/file/d/18HbJdS ... drive_link Right Hand Side
TIA
GS
Re: Which Fairing Bolts
Posted: Mon Mar 18, 2024 8:55 pm
There are 3 screws that are longer without shoulders in each engine fairing starting with the 2019 and usually no screw on the tank cover forward point under the each side glove box.
On the Torque Sheet, the new value for the rear Brake Caliper is 28Nm vs 24Nm.
I may make a completely NEW version of these for the ShiftHead in the near future...it's a lot of cutting/glueing and general "art work" to make these before taking a HI REZ photo so I can reprint them at the local FedEx Office store.
Brad
On the Torque Sheet, the new value for the rear Brake Caliper is 28Nm vs 24Nm.
I may make a completely NEW version of these for the ShiftHead in the near future...it's a lot of cutting/glueing and general "art work" to make these before taking a HI REZ photo so I can reprint them at the local FedEx Office store.
Brad
Re: Which Fairing Bolts
Posted: Wed Mar 20, 2024 12:23 am
Funny, those are exactly the bolts that triggered my question about the updated diagram.Boxflyer wrote: ↑Mon Mar 18, 2024 8:55 pm There are 3 screws that are longer without shoulders in each engine fairing starting with the 2019 and usually no screw on the tank cover forward point under the each side glove box.
On the Torque Sheet, the new value for the rear Brake Caliper is 28Nm vs 24Nm.
I may make a completely NEW version of these for the ShiftHead in the near future...it's a lot of cutting/glueing and general "art work" to make these before taking a HI REZ photo so I can reprint them at the local FedEx Office store.
Brad
When I removed the panels in the picture below, I realized somebody used 2 different screws on each side, a long one without a shoulder and another one with a shoulder.
This does not seem right because the panels are uniformly thick, and the mounts they go in also look identical.
Just would like to figure out where the "shoulder-less" long screws are supposed to go.
Thanks!
- RT panel screws.jpg (258.67 KiB) Viewed 1370 times