iABS issues

Having Problems with your BMW R1200RT/R1250RT? or have some Maintenance and Service questions?
Post Reply
mrtg
Posts: 2
Joined: Fri Aug 10, 2018 8:20 pm

iABS issues

Post by mrtg »

Hi
I’m new to forum and wonder if anyone might be able to help me, I have a 2005 r1200rt with an abs issue, the original fault was the abs releasing under heavy braking (the wheels weren’t locking) and the brake fault light flashing after.  Since then I’ve totally flushed and bled the system (all 4 circuits) just test rode it, bike seems ok until you apply very heavy braking on rear circuit then fault light comes on and servo stops whining (rear circuit only) front seems fine.  Bike resets when power turned off, seems ok until heavy braking re-applied to rear.
I’ve invested in an elm327 reader and motoscan software, however fault code given means nothing to me (wheel circuit rear code 618c) anyone any ideas, suggestions?


Thanks in advance Tony
User avatar
Beagle
Posts: 582
Joined: Mon Jul 16, 2018 7:42 pm

Re: iABS issues

Post by Beagle »

mrtg wrote: Hi
I’m new to forum and wonder if anyone might be able to help me, I have a 2005 r1200rt with an abs issue, the original fault was the abs releasing under heavy braking (the wheels weren’t locking) and the brake fault light flashing after.  Since then I’ve totally flushed and bled the system (all 4 circuits) just test rode it, bike seems ok until you apply very heavy braking on rear circuit then fault light comes on and servo stops whining (rear circuit only) front seems fine.  Bike resets when power turned off, seems ok until heavy braking re-applied to rear.
I’ve invested in an elm327 reader and motoscan software, however fault code given means nothing to me (wheel circuit rear code 618c) anyone any ideas, suggestions?


Thanks in advance Tony

Does this help?


https://forum.hexcode.co.za/forum/viewtopic.php?t=4
mrtg
Posts: 2
Joined: Fri Aug 10, 2018 8:20 pm

Re: iABS issues

Post by mrtg »

Excellent thanks for the response, wish I knew what code reader was saying but failing that will have a try at what the link suggests
Cheers again
Post Reply