Stainless Steel Caliper Pins

Looking for Aftermarket parts and Accessories for your BMW R1200RT/R1250RT or found something useful you want to share? Or just a general question?
User avatar
David.
Subscriber
Posts: 8007
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 332 times
Great Britain

Stainless Steel Caliper Pins

Post by David. »

Looking to enhance the appearance of the F&R brake callipers on my 2012 TC RT. Chris Shaw Engineering, https://www.shawstainless.co.uk/ manufacture and supply stainless steel fasteners for BMW motorcycles. Has anyone had any experience of their products and/or can recommend other suppliers.

The products I'm interested in are F&R brake calliper pins. From the CSE website, have identified these two items.

FRONT CALIPER PAD PIN, https://www.shawstainless.co.uk/product.php/6059137/
Image

REAR BRAKE CALIPER PAD PIN, https://www.shawstainless.co.uk/product.php/6511391/
Image

I'd contact CSE prior to making any potential purchase, meanwhile, any feedback would be most welcome, thanks.
Last edited by David. on Sat Oct 27, 2018 9:14 pm, edited 1 time in total.
Reaper999
Posts: 43
Joined: Wed Nov 30, 2016 7:48 pm

Re: Stainless Steel Caliper Pins

Post by Reaper999 »

I've had caliper pins and some replacement fairing screws from them and personally I thought they where all pretty good quality.
simbo
Posts: 1372
Joined: Fri Sep 16, 2016 10:33 pm
Location: Greater Manchester
Bike Model and Year: RT 2011
Has liked: 68 times
Been liked: 96 times
Great Britain

Re: Stainless Steel Caliper Pins

Post by simbo »

Don't Stainless and Aluminium react with each other? Or is that just an old wives tale?.
The GS 'is' the better bike :-)
User avatar
David.
Subscriber
Posts: 8007
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 332 times
Great Britain

Re: Stainless Steel Caliper Pins

Post by David. »

For reference purposes, thought I'd add these photos to the thread.

Front calliper
Image

Rear calliper
Image

Image
User avatar
David.
Subscriber
Posts: 8007
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 332 times
Great Britain

Re: Stainless Steel Caliper Pins

Post by David. »

Motorworks also do a front s/s brake pad pin, https://www.motorworks.co.uk/vlive/Shop ... 5_35_HA_30

Looking at their photo, I wouldn't be surprised if it's the same as the Shawstainless one.

Motorworks
Image

Shawstainless
Image
Rhun
Posts: 20
Joined: Mon Sep 11, 2017 8:23 pm

Re: Stainless Steel Caliper Pins

Post by Rhun »

I changed my front and rear calipers to stainless bolts and pins from shawstainless around 15,000 miles ago. I've ridden in all weathers and they still look as good as new whereas the bmw ones corroded easily. I would highly recommend them, also the guy who sells them is very helpful and knowledgeable.

Don't forget copper grease on the threads.

Sent from my G8341 using Tapatalk

User avatar
David.
Subscriber
Posts: 8007
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 332 times
Great Britain

Re: Stainless Steel Caliper Pins

Post by David. »

Rhun wrote:I changed my front and rear calipers to stainless bolts and pins from Shawstainless.
Looking at your posts, would these have been for a 2010 TC RT. If so, please can you help to identity which are the correct F&R pins for my 2012 TC RT.
From Shawstainless website, the photo of the rear pin doesn't show the split steel slotted retaining spring as per OEM pin.

Shawstainless
Image

OEM Rear pin
Image

OEM Front pin
Image

Also, do the OEM front wire & rear R clips fit the Shawstainless pins, thanks.
Last edited by David. on Sun Oct 28, 2018 2:50 pm, edited 1 time in total.
User avatar
milleplod
Posts: 272
Joined: Tue Jul 03, 2018 2:41 pm
Been liked: 1 time

Re: Stainless Steel Caliper Pins

Post by milleplod »

I used them previously on my 1200ST, and now on the RT. The R-clips fit as per the originals. You have to remove the spring collar from the rear one and swap it to the stainless one. There's (just!) enough spring in it to allow removal using a flat-bladed screwdriver or similar in the slot - once on the new pin, I just nipped it up a bit with pliers.
Pete
Rhun
Posts: 20
Joined: Mon Sep 11, 2017 8:23 pm

Re: Stainless Steel Caliper Pins

Post by Rhun »

David. wrote: Looking at your posts, would these have been for a 2010 TC RT. If so, please can you help to identity which are the correct F&R pins for my 2012 TC RT.
From Shawstainless website, the photo of the rear pin doesn't show the split steel slotted retaining spring as per OEM pin.

Shawstainless
Image

OEM Rear pin
Image

OEM Front pin
Image

Also, do the OEM front wire & rear R clips fit the Shawstainless pins, thanks.
Hi,

They're the same pins as used accross the board for all the evo type bmw calipers.

I use the ones attached and haven't had any problems. If you're not sure you can email the guy who supplies them, he's super knowledgeable and helpful. ImageImage

Sent from my G8341 using Tapatalk

User avatar
David.
Subscriber
Posts: 8007
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 332 times
Great Britain

Re: Stainless Steel Caliper Pins

Post by David. »

Thanks both for your replies. Removing the spring collar from the OEM rear pin & fitting it to the new s/s pin sounds like a challenge!

With your help, looks like these are the pins required for a 2012 RT.

Rear, https://www.shawstainless.co.uk/product.php/6511391/
Image

Front, https://www.shawstainless.co.uk/product.php/6059137/
Image

To confirm, will email CSE prior to placing an order.
Last edited by David. on Sun Oct 28, 2018 3:53 pm, edited 1 time in total.
leonjennings
Posts: 96
Joined: Sat Oct 29, 2016 10:26 am
Been liked: 1 time

Re: Stainless Steel Caliper Pins

Post by leonjennings »

simbo wrote: Don't Stainless and Aluminium react with each other? Or is that just an old wives tale?.

Fact, Aluminium and steel placed together will react. They will probably fail at some point but that is not a fact more an opinion. The problem is they may well corrode from the inside out so you may not see anything wrong until too late. the answer in the engineering industry and other arenas is to use a special blocking gel such as Duralac (others are available) which prevents the galvanic action.

2012 SE
User avatar
David.
Subscriber
Posts: 8007
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 332 times
Great Britain

Re: Stainless Steel Caliper Pins

Post by David. »

Here's an example of a grubby brake calliper.

Image

The OEM pin is probably galvanised steel and looks corroded. The retaining wire clip & pad spring are just dirty. Had mine apart for cleaning today, the pins were corroded & required an abrasive to clean up. The wire clip & pad spring cleaned up with a cloth and are like brand new, probably made of s/s. New s/s pins won't corrode either. The pins will be removed at least once per year as part of my maintenance regime.
Last edited by David. on Sun Oct 28, 2018 6:09 pm, edited 1 time in total.
User avatar
milleplod
Posts: 272
Joined: Tue Jul 03, 2018 2:41 pm
Been liked: 1 time

Re: Stainless Steel Caliper Pins

Post by milleplod »

I had the stainless pins on my 1200ST's front and rear calipers for 6 years or more. Nothing on them after all that time other than the usual road muck mixed with brake pad dust - easily removed at the annual home-service and, of course, they come up all shiny and new-looking, unlike the OE ones.

It's not really a challenge to remove the collar - it just levers off with a screwdriver blade.


Pete
User avatar
David.
Subscriber
Posts: 8007
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 332 times
Great Britain

Re: Stainless Steel Caliper Pins

Post by David. »

milleplod wrote:I had the stainless pins on my 1200ST's front and rear calipers for 6 years or more.
Assuming they were the same as those on an RT, did you ever have any problems unscrewing the pad pin on the front calliper or driving out the pad pin on the rear calliper.

Was there any evidence of corrosion between the s/s pins where they were in contact with the alloy callipers.
Last edited by David. on Sun Oct 28, 2018 7:26 pm, edited 1 time in total.
User avatar
milleplod
Posts: 272
Joined: Tue Jul 03, 2018 2:41 pm
Been liked: 1 time

Re: Stainless Steel Caliper Pins

Post by milleplod »

They're exactly the same - no, no problems at all, I used a tiny bit of Ceratec grease on the threads. There's never been a hint of any reaction between the pins and the calipers.
Pete
Post Reply