Cleaning The Exhaust Pipes

General discussion of the BMW R1200RT/R1250RT
User avatar
David.
Subscriber
Posts: 8037
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 333 times
Great Britain

Re: Cleaning The Exhaust Pipes

Post by David. »

Autosol is also of German origin and used by BMW, http://www.autosol.com/aboutus.asp
guest4915

Re: Cleaning The Exhaust Pipes

Post by guest4915 »

realshelby wrote: Happich "Semi-Chrome" is the best all around metal polish I have ever used. Expensive here in the States and not easy to find. Made in Germany, so y'all across the Pond may find it easier over there.
One mistake that is common ( I done it years ago too),is to use common steel wool. That leaves particles in the surface.....that rust! Use stainless steel or I sometimes use the 3M abrasive pads made of Nylon. I put the Semi-Chrome right on the wool or nylon and go at it. Then use a cloth for a final polish job. I have used 2000 grit sandpaper to get really bad corrosion off the pipes, but that takes a good bit of elbow grease to get polished up.
I have never seen any negative effect from using the slightly abrasive metal polishes on chrome.
Also very expensive here in the UK
Post Reply