TPMS: Pressure sensor in wheel

General discussion of the BMW R1200RT/R1250RT
Dee Dub
Posts: 43
Joined: Thu Sep 13, 2018 5:26 pm

TPMS: Pressure sensor in wheel

Post by Dee Dub »

I have had the rear wheel renovated, due to corrosion, and the company has just told me the tyre pressure sensor snapped during removal. (2015 LC, 32000 miles)
:alas:


I can get a used sensor from eBay, but apparently the sensor battery has limited life anyway, so the replacement might not last long anyway. Thoughts?


If I go for a new sensor, I assume that the wheel will be out-of-balance without a sensor securely installed; correct? (If so, I would have to take the wheel by car to a dealer to have a replacement fitted. The nearest is some distance away.)


I assume a replacement sensor will have to be paired with the ECU; correct? If so, is this a GS911 job that would entail a second trip to the dealer?


I thought the wheel renovation cost was a bargain, but it looks like costs are going to mount up!
DW
User avatar
Beagle
Posts: 582
Joined: Mon Jul 16, 2018 7:42 pm

Re: TPMS: Pressure sensor in wheel

Post by Beagle »

If the wheel/Tyre is balanced without a sensor and just an ordinary valve it will be ok
User avatar
David.
Subscriber
Posts: 8046
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 333 times
Great Britain

Re: TPMS: Pressure sensor in wheel

Post by David. »

Are the tyre pressure sensor and valve two separate items attached to the rear wheel.

Image

#3 Valve (attached to the side of a spoke).
Image

Tyre pressure sensor
Image

I can't work out how the tyre pressure sensor is fitted.
Last edited by David. on Thu May 28, 2020 5:38 pm, edited 1 time in total.
User avatar
Boxflyer
Posts: 93
Joined: Wed Nov 26, 2014 12:00 am
Been liked: 16 times

Re: TPMS: Pressure sensor in wheel

Post by Boxflyer »

Deleted
Last edited by Boxflyer on Mon Aug 29, 2022 3:00 am, edited 1 time in total.
User avatar
David.
Subscriber
Posts: 8046
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 333 times
Great Britain

Re: TPMS: Pressure sensor in wheel

Post by David. »

Boxflyer wrote:This might be of some help.
Thank you, does that mean that there is a blind threaded hole in the rim for the tyre pressure sensor and the valve is separate on the spoke.
Dee Dub
Posts: 43
Joined: Thu Sep 13, 2018 5:26 pm

Re: TPMS: Pressure sensor in wheel

Post by Dee Dub »

[size=2px]I can get a used sensor from eBay, but apparently the sensor battery has limited life anyway, so the replacement might not last long anyway. [/size][size=2px]Thoughts?[/size]
DW
User avatar
Boxflyer
Posts: 93
Joined: Wed Nov 26, 2014 12:00 am
Been liked: 16 times

Re: TPMS: Pressure sensor in wheel

Post by Boxflyer »

Deleted
Last edited by Boxflyer on Mon Aug 29, 2022 3:01 am, edited 1 time in total.
User avatar
David.
Subscriber
Posts: 8046
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 333 times
Great Britain

Re: TPMS: Pressure sensor in wheel

Post by David. »

That's great thank you, finally, is the TPMS bolt hollow, I suppose it has to be to work as described.

Image
Last edited by David. on Thu May 28, 2020 7:39 pm, edited 1 time in total.
User avatar
Boxflyer
Posts: 93
Joined: Wed Nov 26, 2014 12:00 am
Been liked: 16 times

Re: TPMS: Pressure sensor in wheel

Post by Boxflyer »

Deleted
Last edited by Boxflyer on Mon Aug 29, 2022 3:01 am, edited 1 time in total.
User avatar
David.
Subscriber
Posts: 8046
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 333 times
Great Britain

Re: TPMS: Pressure sensor in wheel

Post by David. »

So, you could ditch the TPMS and just retain the valve screwed on the side of the spoke.

Without a TPMS, would you always get an error on the dash or can this be eliminated.
User avatar
Boxflyer
Posts: 93
Joined: Wed Nov 26, 2014 12:00 am
Been liked: 16 times

Re: TPMS: Pressure sensor in wheel

Post by Boxflyer »

Yes, you could remove the TPMS sender, and it should be just 2.0oz weight difference (minimal).


Having no signal from a dead battery is the same thing as no TPMS installed, so yes you would get the dash warnings.
User avatar
David.
Subscriber
Posts: 8046
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 333 times
Great Britain

Re: TPMS: Pressure sensor in wheel

Post by David. »

Boxflyer wrote:Having no signal from a dead battery is the same thing as no TPMS installed, so yes you would get the dash warnings.
Can the warning be removed.
User avatar
David.
Subscriber
Posts: 8046
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 333 times
Great Britain

Re: TPMS: Pressure sensor in wheel

Post by David. »

For completeness & my education, this is the type of combined TPMS/Valve arrangement on a pre-LC RT rear wheel.

Image

This is the valve only for a rear wheel on a pre-LC RT.

Image

The front wheel seems to be the same set up on all RT's, with separate TPMS & valve on the side of the spoke.
Last edited by David. on Thu May 28, 2020 8:26 pm, edited 1 time in total.
User avatar
Boxflyer
Posts: 93
Joined: Wed Nov 26, 2014 12:00 am
Been liked: 16 times

Re: TPMS: Pressure sensor in wheel

Post by Boxflyer »

Deleted
Last edited by Boxflyer on Mon Aug 29, 2022 3:01 am, edited 1 time in total.
User avatar
David.
Subscriber
Posts: 8046
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 333 times
Great Britain

Re: TPMS: Pressure sensor in wheel

Post by David. »

My 2012 TC RT doesn't have TPMS, I don't feel unsafe without it.
Post Reply