Saving the cruise control

General discussion of the BMW R1200RT/R1250RT
jackronner
Posts: 506
Joined: Sat Oct 07, 2017 4:45 am
Location: Oakland, California
Has liked: 1 time
Been liked: 9 times
United States of America

Saving the cruise control

Post by jackronner »

I wonder if it would be easier on the cruise control assembly if, when cruising, you keep only your left hand on the grip, and/or keep your right hand on the fixed, unmoving, bar end?  Since the cruise control physically twists the grip, I'm thinking a tightish right hand might make it work harder and eventually wear on the motor or cables over the life of the unit.  If you have a naturally tight grip, it might also negate the control's acceleration or deceleration action. 
User avatar
David.
Subscriber
Posts: 8007
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 332 times
Great Britain

Re: Saving the cruise control

Post by David. »

When using the cruise control, I tend to follow a similar procedure to that which has been described above.
Last edited by David. on Mon Mar 01, 2021 11:38 am, edited 1 time in total.
k900r
Posts: 26
Joined: Tue Jul 21, 2015 9:56 pm

Re: Saving the cruise control

Post by k900r »

That’s how I ride with cruise control, my right hand palm rests on the bar end. That way it’s resting near to the controls for quick reactions but can’t accidentally affect the cruise.


Sent from my iPhone using Tapatalk
Gavj
Posts: 126
Joined: Sun Sep 27, 2020 5:37 pm
Bike Model and Year: R1250RT 2020
Has liked: 10 times
Been liked: 15 times
Great Britain

Re: Saving the cruise control

Post by Gavj »

[size=0px]"the cruise control physically twists the grip"[/size]
[size=0px]
[/size]
I have never noticed this? My grip returns to the idle position when I let it go with the cruise engaged, same with my previous bike (Triumph Trophy) are you sure the earlier models do this?
User avatar
David.
Subscriber
Posts: 8007
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 332 times
Great Britain

Re: Saving the cruise control

Post by David. »

Could be the difference between cable and "fly by wire" throttle.
jackronner
Posts: 506
Joined: Sat Oct 07, 2017 4:45 am
Location: Oakland, California
Has liked: 1 time
Been liked: 9 times
United States of America

Re: Saving the cruise control

Post by jackronner »

Gavj,  If, by "returns to idle", you mean it automatically returns to the last selected speed after you've accelerated by twisting the grip, that's normal.  If, by"Idle", you mean it's returned to the grip fully forward (as if the bike were turned off), that's NOT normal.  That should only happen if you've disengaged the cruise control or have hit the brakes.
Gavj
Posts: 126
Joined: Sun Sep 27, 2020 5:37 pm
Bike Model and Year: R1250RT 2020
Has liked: 10 times
Been liked: 15 times
Great Britain

Re: Saving the cruise control

Post by Gavj »

I think David has the answer, both the Triumph and my RT are fly by wire throttles. To cancel the cruise you turn the twist grip back against a stop which turns off the cruise. Im assuming earlier systems just lock the throttle cable, where the fly by wire systems get the throttle position from the ECU.


Reminds me of an afermarket cruise control system a mate of mine had on a Morris Marina (showing my age now  :)) ) It used a diaphram and an air valve to hold the throttle position, ok untill you went down a hill and the bloomin  thing sped up  :wonder:
jackronner
Posts: 506
Joined: Sat Oct 07, 2017 4:45 am
Location: Oakland, California
Has liked: 1 time
Been liked: 9 times
United States of America

Re: Saving the cruise control

Post by jackronner »

Gavj,  Showing MY age:  My first bike was bought on vacation in Britain in [size=78%]'71, and had a then state of the art cruise control, with consisted of a knurled screw that just immobilized the throttle grip!  Prone to the same artless speed-up downhill (and vice-versa), and god forbid you spilled the bike!  The engine would scream and the wheel would spin enough to make the bike brake-dance.  Love the RT's cruise control;  kinda like you have a ghost driving the bike for you, uphill or down.[/size]
[size=78%]
[/size]
User avatar
David.
Subscriber
Posts: 8007
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 332 times
Great Britain

Re: Saving the cruise control

Post by David. »

Nothing wrong with a rubber band between the throttle twist grip and the handle bar switch. Worked a treat on my Honda C90 (in 1975),  allowing the use of hand signals when turning right. Technology, who needs it, just something to go wrong.
jackronner
Posts: 506
Joined: Sat Oct 07, 2017 4:45 am
Location: Oakland, California
Has liked: 1 time
Been liked: 9 times
United States of America

Re: Saving the cruise control

Post by jackronner »

Aye-men, David.  Bit of a Luddite Lad myself, but must admit to loving the cruise control and adjustable screens.  The former is a safety feature too, since it allows the quick use of two hands for small tasks without the bike slowing and slewing while your attention is elsewhere. 
User avatar
David.
Subscriber
Posts: 8007
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 332 times
Great Britain

Re: Saving the cruise control

Post by David. »

On a Camhead RT with cruise control, there are five separate cables fitted. Two cables from the throttle twist grip connected to a pulley inside the splitter box. Then two more cables go from the same pulley to the throttle bodies. A fifth cable links the cruise control unit to a second pulley inside the splitter box.

If, when the cruise control is activated (set),  the speed is increased or decreased on the handle bar button, the throttle twist grip can be seen to open or close. Hence, why relaxing grip on the throttle when the cruise control is set/adjusted is a good practice. Agree with jackronner, if accelerating, then release grip of the throttle, the cruise control will pick up the previously set speed. Rolling off/closing the throttle position will de-activate the cruise control.
Last edited by David. on Tue Mar 02, 2021 4:13 am, edited 1 time in total.
Sullivj
Posts: 709
Joined: Wed Jul 06, 2016 9:46 pm
Location: Gatwick
Has liked: 18 times
Been liked: 16 times
Great Britain

Re: Saving the cruise control

Post by Sullivj »

1 / Turn on cruise
2/ Remove Hands From Bars
3/ Lean on TopBox and relax


:-)
BoB21
Posts: 754
Joined: Fri Apr 21, 2017 11:38 am
Has liked: 32 times
Been liked: 34 times
Great Britain

Re: Saving the cruise control

Post by BoB21 »

Sullivj wrote: 1 / Turn on cruise
2/ Remove Hands From Bars
3/ Lean on TopBox and relax


:-)

missed getting onto back seat.
User avatar
David.
Subscriber
Posts: 8007
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 332 times
Great Britain

Re: Saving the cruise control

Post by David. »

Sounds like you have both been on an i2i MCA Course.
simbo
Posts: 1372
Joined: Fri Sep 16, 2016 10:33 pm
Location: Greater Manchester
Bike Model and Year: RT 2011
Has liked: 68 times
Been liked: 96 times
Great Britain

Re: Saving the cruise control

Post by simbo »

David. wrote: Sounds like you have both been on an i2i MCA Course.

Nah, no mention of pouring a coffee from their flasks.
The GS 'is' the better bike :-)
Post Reply