full beam. Why?

General discussion of the BMW R1200RT/R1250RT
User avatar
Steve398
Posts: 731
Joined: Thu Jul 11, 2019 8:41 pm
Location: West Sussex, UK
Bike Model and Year: R1200RTLC, 2018
Has liked: 278 times
Been liked: 238 times
Isle of Wight

Re: full beam. Why?

Post by Steve398 »

Night time - I'll use main beam at night as much as possible in both urban and rural areas so that I can get the best available view as far ahead as possible, but only when I won't be dazzling/affecting other road users (including pedestrians), so when following or with oncoming vehicles it's dipped beam only. If the traffic conditions allow why wouldn't you want to see further up the road when it's dark? It improves your personal safety by your seeing potential hazards far sooner, I want as much illumination ahead as I can get at night 'cos I don't like surprises!

Day time - Personally I see no logical reason for using main beam in the day, particularly in traffic, as it will surely just produce a blinding white glare (particularly LED's) that will cause difficulties for other road users (including pedestrians) to estimate your speed, distance, or position. If it's attention you need for safety then the 3 points of light or yellow fogs will make you stand out better, anything that is different from the norm or something that will make a driver look again. You don't need something that will blind them, they're blind enough already! :lol: This article by Andrew Dalton, a bike riding Solicitor may be of interest -

https://www.whitedalton.co.uk/motorbike ... torcycles/

As an afterthought, it's always bemused me when I'm behind a car at night, just me and him, in an unlit derestricted road and with no traffic ahead or oncoming and he's doing 40 mph on dipped beam, presumably because he can only see about 25' in front of him. I can't overtake him 'cos I can't see where the road goes, but if he switches to main beam he can see further and will therefore be safer, and from a personal point of view he's immediately improved my view and I can get past him... as I said, just a thought.
Last edited by Steve398 on Wed Nov 16, 2022 5:53 pm, edited 1 time in total.
User avatar
Doctor T
Posts: 1666
Joined: Tue Dec 21, 2021 10:21 pm
Location: west sussex
Bike Model and Year: 2007 R1200RT SE
Has liked: 909 times
Been liked: 239 times
Great Britain

Re: full beam. Why?

Post by Doctor T »

More or less what Steve said. Use your common sense when using a high beam. The dipped beam with 2 low powered daylight in yellow stands out. It's called the light triangle. It has been proved that this light setup is more noticeable to oncoming traffic and in a vehicle's rear mirrors.
As for LED headlamp bulbs. Our bikes lamp reflectors are not designed for LED bulbs. They may look nice and bright but you have more of a chance of blinding oncoming traffic. The homemade conversion with these bulbs is an MOT fail and you can also be stopped and fined by the Police.
I have full LED lighting on my car and i don't like them. Compared to a standard halogen bulb, LED lighting is not as good. You get more road definition with a standard bulb, you can pick out curbs, potholes, road surfaces, etc better.
Trust me I am a retired Doctor and lecturer at Oxford University of Structural and Mechanical/Electrical engineering.
scunny12
Subscriber
Posts: 169
Joined: Sat Mar 14, 2020 8:13 pm
Location: North Lincs
Bike Model and Year: 1200RT LE 2015
Has liked: 25 times
Been liked: 36 times
Great Britain

Re: full beam. Why?

Post by scunny12 »

Doctor T wrote: Wed Nov 16, 2022 3:00 pm More or less what Steve said. Use your common sense when using a high beam. The dipped beam with 2 low powered daylight in yellow stands out. It's called the light triangle. It has been proved that this light setup is more noticeable to oncoming traffic and in a vehicle's rear mirrors.
As for LED headlamp bulbs. Our bikes lamp reflectors are not designed for LED bulbs. They may look nice and bright but you have more of a chance of blinding oncoming traffic. The homemade conversion with these bulbs is an MOT fail and you can also be stopped and fined by the Police.
I have full LED lighting on my car and i don't like them. Compared to a standard halogen bulb, LED lighting is not as good. You get more road definition with a standard bulb, you can pick out curbs, potholes, road surfaces, etc better.
I too have full LED and find them to be far superior to Xenon or halogens. They bend and illuminate corners instead of just a straight beam. All in all the difference is like Day and Night. ;)
User avatar
Steve398
Posts: 731
Joined: Thu Jul 11, 2019 8:41 pm
Location: West Sussex, UK
Bike Model and Year: R1200RTLC, 2018
Has liked: 278 times
Been liked: 238 times
Isle of Wight

Re: full beam. Why?

Post by Steve398 »

I know this is an old thread but I recently took pics on a deserted main road of the low/high beam with my Cyclops LED converted lights plus a set of Clearwater Darla’s (with yellow lens fitted) that are set at 40% power on dipped and 100% on main beam.
I’ll also add that I didn’t get flashed by any other traffic that night.

F495E4FC-F991-48A7-A25A-3BD0BDD6ED4F.jpeg
F495E4FC-F991-48A7-A25A-3BD0BDD6ED4F.jpeg (404.86 KiB) Viewed 236 times
D3E19586-49AF-4CA4-BD92-8E5BC0D2EA4E.jpeg
D3E19586-49AF-4CA4-BD92-8E5BC0D2EA4E.jpeg (416.24 KiB) Viewed 236 times
User avatar
EasyRider
Subscriber
Posts: 586
Joined: Tue Nov 21, 2023 7:27 am
Location: South Wales
Bike Model and Year: 2019 R1250RT LE
Has liked: 87 times
Been liked: 160 times
Wales

Re: full beam. Why?

Post by EasyRider »

I just ride in the day time with Halo's and lower spots on on the RT, and just dipped beam (LED's) on my other bikes.
Dont Ride Faster, Than Your Angel Can Fly. :thumb:
User avatar
Steve398
Posts: 731
Joined: Thu Jul 11, 2019 8:41 pm
Location: West Sussex, UK
Bike Model and Year: R1200RTLC, 2018
Has liked: 278 times
Been liked: 238 times
Isle of Wight

Re: full beam. Why?

Post by Steve398 »

EasyRider wrote: Mon Apr 22, 2024 4:41 pm I just ride in the day time with Halo's and lower spots on on the RT, and just dipped beam (LED's) on my other bikes.
Me too, but I had the time and dry weather to go out on the bike one night, just to see how good the Cyclops were… highly impressed with them 👍
User avatar
EasyRider
Subscriber
Posts: 586
Joined: Tue Nov 21, 2023 7:27 am
Location: South Wales
Bike Model and Year: 2019 R1250RT LE
Has liked: 87 times
Been liked: 160 times
Wales

Re: full beam. Why?

Post by EasyRider »

Steve398 wrote: Mon Apr 22, 2024 5:17 pm to go out on the bike one night,
Come 7pm i have my PJ's on, feet up watching TV :-D
Dont Ride Faster, Than Your Angel Can Fly. :thumb:
User avatar
Steve398
Posts: 731
Joined: Thu Jul 11, 2019 8:41 pm
Location: West Sussex, UK
Bike Model and Year: R1200RTLC, 2018
Has liked: 278 times
Been liked: 238 times
Isle of Wight

Re: full beam. Why?

Post by Steve398 »

It was actually one of those rare warmish evenings with not much traffic, and really quite a pleasant ride out. That was based on the fact that I hit no dammed potholes, deer, or badgers, and it didn’t rain!

Very good bulbs though 👍
BikerBill21
Posts: 11
Joined: Sun Oct 10, 2021 4:33 pm
Bike Model and Year: 2022 RT
Has liked: 1 time
Been liked: 3 times
Great Britain

Re: full beam. Why?

Post by BikerBill21 »

My tuppence worth.....
'Yellows' at car driver sight line, flash in sync with indicators so no conflict, indicator on/ yellow off
IMG_3845.jpeg
IMG_3845.jpeg (176.88 KiB) Viewed 167 times
User avatar
Steve398
Posts: 731
Joined: Thu Jul 11, 2019 8:41 pm
Location: West Sussex, UK
Bike Model and Year: R1200RTLC, 2018
Has liked: 278 times
Been liked: 238 times
Isle of Wight

Re: full beam. Why?

Post by Steve398 »

I can understand the need for that, they are really close! 8-)
Last edited by Steve398 on Tue Apr 23, 2024 7:20 pm, edited 2 times in total.
Glenn
Posts: 277
Joined: Sat Jan 15, 2022 7:49 pm
Location: Shropshire
Bike Model and Year: R1250RT LE 2018
Has liked: 28 times
Been liked: 87 times
Great Britain

Re: full beam. Why?

Post by Glenn »

Steve398 wrote: Thu Oct 06, 2022 8:04 pm I don’t think so…
Amber lights made no difference for me when I got knocked off 3 weeks ago
User avatar
Steve398
Posts: 731
Joined: Thu Jul 11, 2019 8:41 pm
Location: West Sussex, UK
Bike Model and Year: R1200RTLC, 2018
Has liked: 278 times
Been liked: 238 times
Isle of Wight

Re: full beam. Why?

Post by Steve398 »

You can only try your best… It’s what the phrase WTF! was designed for :lol:
User avatar
Doctor T
Posts: 1666
Joined: Tue Dec 21, 2021 10:21 pm
Location: west sussex
Bike Model and Year: 2007 R1200RT SE
Has liked: 909 times
Been liked: 239 times
Great Britain

Re: full beam. Why?

Post by Doctor T »

I've got yellow fog lamps fitted to the engine guards. I've only used them in really downpours and once on a foggy morning. I believe that I was more visible in the sheet rain whilst riding home on the M4 from Gwent.
Trust me I am a retired Doctor and lecturer at Oxford University of Structural and Mechanical/Electrical engineering.
Capt Sisko
Posts: 138
Joined: Tue Aug 02, 2022 9:25 pm
Location: Shropshire
Bike Model and Year: R1250RT LE - '18
Has liked: 6 times
Been liked: 59 times
Great Britain

Re: full beam. Why?

Post by Capt Sisko »

BikerBill21 wrote: Tue Apr 23, 2024 11:35 am My tuppence worth.....
'Yellows' at car driver sight line, flash in sync with indicators so no conflict, indicator on/ yellow off

IMG_3845.jpeg
That's a very similar set up to mine and although it's entirely unscientific, but when I changed from clear to Yellow filters on my Denali lights drivers did seem to take more notice of me.
burridge01
Posts: 583
Joined: Tue Jul 02, 2019 11:25 am
Location: Basildon, Essex
Bike Model and Year: Modified "16" R1200RT
Been liked: 194 times
Great Britain

Re: full beam. Why?

Post by burridge01 »

Capt Sisko wrote: Wed Apr 24, 2024 5:00 pm That's a very similar set up to mine and although it's entirely unscientific, but when I changed from clear to Yellow filters on my Denali lights drivers did seem to take more notice of me.
"Capt Sisko"'what Denali's do you have and where did you get the filters,quite fancy a bit of yellow meself :thumb:
Post Reply