Instruments shroud 2009 RT

General discussion of the BMW R1200RT/R1250RT
Post Reply
jackronner
Posts: 506
Joined: Sat Oct 07, 2017 4:45 am
Location: Oakland, California
Has liked: 1 time
Been liked: 9 times
United States of America

Instruments shroud 2009 RT

Post by jackronner »

Sorry, can’t seem to upload a photo. This concerns the decorative silver-colored shroud/frame surrounding the main instrument cluster. It popped off at about 70 mph but I managed to catch it. There seems to be no method of attachment around the speedo/tack cluster. No raised tabs etc. either on the shroud, or on the cluster. There are two slots/holes on the bottom, just outboard of the odometer and clock buttons, but I can’t feel or see any corresponding tabs either on the cluster itself or the opening into which it fits, that would snap into the slots. There are no slots on the top of the shroud. I can’t find any reference to the shroud in the Haynes, manual, and the Motorrad parts diagram show a slightly different shroud. Any experience or ideas for fixing it to the cluster short of superglue?
Angus
Posts: 5
Joined: Tue Mar 26, 2019 10:32 am
Location: England
Bike Model and Year: 2005r1200rt
Great Britain

Re: Instruments shroud 2009 RT

Post by Angus »

Try small dabs of silicon sealant on inside edge of shroud
User avatar
Doctor T
Posts: 1624
Joined: Tue Dec 21, 2021 10:21 pm
Location: west sussex
Bike Model and Year: 2007 R1200RT SE
Has liked: 878 times
Been liked: 230 times
Great Britain

Re: Instruments shroud 2009 RT

Post by Doctor T »

Make sure its the waterproof sealer
Trust me I am a retired Doctor and lecturer at Oxford University of Structural and Mechanical/Electrical engineering.
Post Reply