BMW R1200RT/R1250RT Forum

I have ordered some heed engine bars and I need to remove the auxiliary light brackets and replace them with something else

Anyone got any recommendations? particularly ones that will fit the BMW lights on

I have seen some lights mounted between the fairing under the front light which looked good but can't find any brackets for them

Try this?

https://www.ebay.co.uk/itm/185301338240 ... media=COPY

Glacial wrote: ↑Tue Apr 25, 2023 10:25 pm Try this?

https://www.ebay.co.uk/itm/185301338240 ... media=COPY

Thanks but mine is a 2016 model

Denali does mounts that fit just below the mirrors but a bit expensive at £116. Also there is Heed and Givi. I think Wunderlich do some

Dependant on the fixing, are either of these suitsble?

https://m.aliexpress.com/item/100500450 ... 4itemAdapt

https://www.ebay.co.uk/itm/115608053477 ... media=COPY

Yeah the denali ones are a bit on the steep side!

By the looks of it I will be fitting them to the engine bars using something like what Steve linked to

I have Illium brackets. But again not a cheap option. Sportouring are a uk supplier

Found some but not sure if I like the position they are in!

I wanted them higher or in a similar position to the standard ones but the brackets and bar combination just won't allow that position!

Am I being too picky?

If they stay there I will need to extend the wiring

sakm wrote: ↑Tue May 02, 2023 8:47 pm Found some but not sure if I like the position they are in!

I wanted them higher or in a similar position to the standard ones but the brackets and bar combination just won't allow that position!

Am I being too picky?

If they stay there I will need to extend the wiring

Will they not fit on the top part of the bar ? .

Panman40 wrote: ↑Thu May 04, 2023 6:35 am Will they not fit on the top part of the bar ? .

Not really!

The brackets are pretty big and can't get the correct angles due to fouling with the engine

Plus the rear of the lights touch the engine too

Here are mine on the Illium brackets, they are full adjustable on all planes.

Casbar wrote: ↑Thu May 04, 2023 12:42 pm Here are mine on the Illium brackets, they are full adjustable on all planes. IMG_4147.JPG

If I had a bar as far forward as yours I would be OK

What about these?eBay item number:185802988180
eBay item number:404239281635
https://www.aliexpress.com/item/1005003 ... lgo_exp_id
https://www.aliexpress.com/item/1005003 ... e0ALC6e3BD
https://www.aliexpress.com/item/1005001 ... o_exp_id=c

Doctor T wrote: ↑Fri May 05, 2023 4:09 pm What about these?eBay item number:185802988180

These are the ones I bought already

They fit and work I'm just not sure if I am happy with the position


Ps the links didn’t work so I just used the item number

Extended the wiring for the lights the other night!

I went the whole hog and removed the loom for the lights and extended them at the top end where it is all hidden and taped it all back up and it looks stock! well what you can see of it anyway

Lights look OK where they are now they work