Anyone else?

General discussion of the BMW R1200RT/R1250RT
Post Reply
Sacowan
Posts: 10
Joined: Thu Apr 07, 2022 5:37 am
Location: NorBay, NorCal
Bike Model and Year: 2020/RT
Has liked: 3 times
Been liked: 2 times
United States of America

Anyone else?

Post by Sacowan »

Riding down the road, minding my own business, and the windshield tipped back. Only 1/2 mile from home, so I finished my trek.

Get in the garage to find the two pins or bolts that hold the bottom of the windshield to the up/down frame are gone!

Now, I am on a mission to replace them. Local shop’s closed today. I found an on line microfiche, but the parts are not listed. Anyone help me?
IMG_0013.jpeg
IMG_0013.jpeg (429.88 KiB) Viewed 901 times
IMG_0012.jpeg
IMG_0012.jpeg (435.02 KiB) Viewed 901 times
Ain’t no right way to do the wrong thing.
Mac001
Posts: 38
Joined: Tue May 16, 2023 2:25 pm
Location: Wiltshire
Bike Model and Year: R1250 RT LE 2019
Has liked: 15 times
Been liked: 14 times
Great Britain

Re: Anyone else?

Post by Mac001 »

BMW do sell them individually, mine are inbound as I found one missing last week. Ordered a couple and the clips for around £30 delivered. I couldn’t find anything online that matched. Sorry I don’t know the part numbers yet. The other one was missing its clip and was just about to disappear. I managed to make a temporary repair by cutting down a footrest pin that was close to the same diameter. As far as I can tell they start to bind up then work out as they twist each time you raise the screen. I have greased them and over the weekend the screen was nice and solid.
User avatar
60Aviator
Posts: 54
Joined: Sun Mar 28, 2021 10:17 pm
Bike Model and Year: 2017 GSA & 2021 R1250RT
Has liked: 7 times
Been liked: 11 times
United States of America

Re: Anyone else?

Post by 60Aviator »

This is what works on my 21 RT. I can't remember where I got them, Amazon, Grainger, McMaster Carr, Fasenal, Lowes, etc..
Attachments
20230530_060322.jpg
20230530_060322.jpg (211.89 KiB) Viewed 840 times
20230530_060311.jpg
20230530_060311.jpg (148.43 KiB) Viewed 840 times
“I’d rather go down the river with seven studs than with a hundred poopheads” Charlie Beckwith
User avatar
60Aviator
Posts: 54
Joined: Sun Mar 28, 2021 10:17 pm
Bike Model and Year: 2017 GSA & 2021 R1250RT
Has liked: 7 times
Been liked: 11 times
United States of America

Re: Anyone else?

Post by 60Aviator »

This is where I heardf about these:
https://www.bmwlt.com/threads/k1200lt-w ... st-1980814
“I’d rather go down the river with seven studs than with a hundred poopheads” Charlie Beckwith
User avatar
sakm
Administrator
Posts: 1300
Joined: Wed Jun 02, 2021 9:13 pm
Location: Hull, UK
Bike Model and Year: 2016 R1200RT
Has liked: 436 times
Been liked: 388 times
Great Britain

Re: Anyone else?

Post by sakm »

I have just ordered some pins in two different sizes with split pins instead of clips

I will let you know of my findings before I post any links
ds99
Posts: 404
Joined: Mon Jul 18, 2016 3:06 pm

Re: Anyone else?

Post by ds99 »

on my 2007 RT i had all four screen "arms" break and the screen almost came off when i was riding. i replaced them with steel ones as the original ones go brittle over time and break

another BMW design fail....
Sacowan
Posts: 10
Joined: Thu Apr 07, 2022 5:37 am
Location: NorBay, NorCal
Bike Model and Year: 2020/RT
Has liked: 3 times
Been liked: 2 times
United States of America

Re: Anyone else?

Post by Sacowan »

I found bmw parts. Typically priced bmw parts!

Bobs bmw in Maryland.

Talked to one of the parts guys (drew, I think). The shipping price automatically set on the website was crazy. He made it right.
Ain’t no right way to do the wrong thing.
RTs4me
Posts: 104
Joined: Sun Mar 08, 2015 10:42 am
Has liked: 5 times
Been liked: 7 times
Great Britain

Re: Anyone else?

Post by RTs4me »

I've just had the same on my 2020 R1250RT.

I was washing the bike and lifted the screen to the highest position to clean the underside. Noticed that the lower left pivot pin was missing completely. The e-clip was missing from the lower right side pin, but the pin was still in position.

I can only assume that the e-clip has dropped off the left pin and allowed the pin to vibrate loose. Presumably, the right side pin would have followed if I hadn't spotted it and fitted a new e-clip.

Interestingly, both upper pins were still in position and both e-clips were present.

Replacement lower pin is on order, expected next week. I'll remove all 4 pins and clean/lubricate them on reassembly. According to the parts microfiche, the upper and lower pins are slightly different sizes. That's not a sensible engineering approach.
Toaster
Posts: 41
Joined: Tue Dec 13, 2016 7:56 pm
Location: West Sussex, UK
Bike Model and Year: 2019 BMW R1250RT
Been liked: 1 time
Great Britain

Re: Anyone else?

Post by Toaster »

Just checked my motorcycle today, all pins are there, but one circlip missing and the pin was moving out.
Thanks for sharing this info.

Cheers

David
Post Reply