Run Time and Avg Speed

[EasyRider]

So i have just found and reset the engine run time on my R1250RT.
It was at 382 hours with the mileage on 15888 miles.
I emailed the last owner and was told this was never reset.
So if i say 6 hours max stop time with engine running (ie, traffic, traffic lights, workshop time ect ect).
That works out at an Avg speed of 42 mph since the bike was new.

The RT is 55 months old tomorrow, so it works out at only 289 miles per month with a Avg run time of just 7 hours per month.
Which looks to me as it did not spend much time on the motorway and spent its time sight seeing.
Going by the old MOT's i think even with the bike doing an Avg of 3500 miles a year, the bike was not used all year round.

I have now reset it to see what my Avg mph and run time is per year.

So have a look at what run time hours your RT has done.

And yes, i'm bored.

[Capt Sisko]

I think your RT is the same series as mine with dial clocks. Where do you find the run time?

[EasyRider]

press the menu botton to the second page, scroll down and its just before the Date tab.

[BikerBill21]

Do the math...my first month of ownership...hours running / mileage covered = big smiles

All on track of course..

IMG_3965.PNG (419.59 KiB) Viewed 110 times

[sakm]

Do the math...my first month of ownership...hours running / mileage covered = big smiles

All on track of course..

IMG_3965.PNG

That has to be wrong!

That works out at an average of 100mph!

I think your time must have been reset at some point

[BikerBill21]

ummm, no, yes 100 mph as an average.....therein lies my shame / exhilaration experience....
picked up bike on 1st March, this screenshot 8th April....