Page 1 of 1
Controlling Speaker setting for 2020 R1250RT
Posted: Wed Apr 02, 2025 6:52 pm
by deanbob
Hello,
I'm new to the group and learning about the bike I just purchased. In trying to get all my devices synched to my 2020 BMW R1250RT, I have encountered a "Speaker Off" indicator on the display. I have looked through all the menus and can't find a way to toggle the speaker to be on once it is off. Thanks in advance for the help!
Re: Controlling Speaker setting for 2020 R1250RT
Posted: Thu Apr 03, 2025 6:34 pm
by Fieldstone
Hi
Press the Menu selector
Go to Settings
Scroll to the top (wheel
goes both ways).
Scroll to the top (again wheel goes forward)
See loudspeak.
Re: Controlling Speaker setting for 2020 R1250RT
Posted: Thu Apr 03, 2025 6:36 pm
by Fieldstone
Sorry
Select Audio at the settings menu then loudspeak
Re: Controlling Speaker setting for 2020 R1250RT
Posted: Mon Apr 07, 2025 6:17 pm
by deanbob
Thanks Fieldstone! I'll recheck that as I thought I had tried that previously...
Re: Controlling Speaker setting for 2020 R1250RT
Posted: Mon Apr 07, 2025 6:53 pm
by Fieldstone
Been there. You think why is this happening (as you look at the heated grip and seat menu)
You can not always see all of the options per each menu
Some like audio are hiding at the top. Scroll up at the settings menu.
Re: Controlling Speaker setting for 2020 R1250RT
Posted: Tue Apr 08, 2025 5:35 am
by deanbob
You were correct Fieldstone, the "Audio" menu required scrolling up to show the speaker setting. For some reason it was defaulting to just the lower two settings. Problem solved! Thanks