BMW R1200RT/R1250RT Forum

Were the grub screws removed from both the brake and clutch levers, with the plungers being removed and reused in the replacement levers.

Panman40 wrote: ↑Sat May 25, 2024 7:49 amI managed to mess up the tiny 2mm Allen grub screws you have to loosen.

Is this the grub screw in question which needs to be loosened to adjust or remove the plunger.
Adjusting the plunger.

Is it the plunger adjuster or grub screw in the barrel which is rounded out.
If it's the grub screw, this might do the trick, https://a2stainless.co.uk/product/m4-x- ... in-914-a2/

Remove the clutch side, check the size and see if Stig Fasteners have one to fit, https://a2stainless.co.uk/page/1/?s=gru ... pe=product

I've read that they may by M4 x 8mm x 0.7mm pitch.

GARY64 wrote: ↑Fri May 24, 2024 5:56 pmI've tried looking for a new v stream but cannot find one for new model 2023, any ideas.

https://www.motorworks.co.uk/windscreen-zta02348-1.html

https://www.motorworks.co.uk/windscreen-zta02349-1.html

AFAIK, the minimum penalty for speeding is a £100 fine and 3 penalty points added to your licence. However, providing you haven't previously taken a speed awareness course within the past three years, in a 50 mph limit, a course may be offered between 57 - 64 mph. Prices range from roughly £75 to £1...

Recently had to replace two headlight bulbs, used the garden hose trick.

The RS2's have now done 6,600 miles. In the centre of the tyre, the front is still at 1.0 mm to the TWI and the rear is now down to 2.0 mm to the TWI. As the ride is still compliant, will continue to use them.

These are the routes Ashley & I road together in Wales.

(The red route is our return home).

This is the last of 5 Annual UK RT Meets organised by myself.

It was at this event when the, "taking the piss" started, which is why I haven't organised any meets since 2020.

This was the first Annual UK RT Meet in 2016.

David. wrote: ↑Thu May 09, 2024 7:03 amI'll crack 50K miles today, will update later.

Have re-voted, now in the 50 to 55K bracket.

David. wrote: ↑Sun May 05, 2024 8:42 amBy the time I've been to Wales & back (700 miles) they should be ready for changing after a total of 6,570 miles.

Not a bad estimate, did 711 miles. Will check the remaining tread depths later.

Another full day out from 9am to 9pm, covering 287 miles. A total of 711 over the 3 days.

Last stop of the day at Leeds Skelton Lake services.